Selects the number of images on a sheet. Is displayed when setting
2-images on a sheet. (2 S-size images can be printed in L size
print. However, the top and bottom of the image will be clipped.)
2 reduced images on a sheet. (For L size print, the images can be
printed without clipping by reducing S size images. In the case, the
printing speed (PRN SPEED) becomes NORMAL. For S size print,
2 images can be printed as the same result as 2 mode.)
4-images on a sheet
16-images on a sheet
2S is not displayed when selecting THERMAL : ON.
When selecting MODE : PHOTO1, the following sizes are available.
3 * 4
5 * 5
3 * 3.5
Sets the print area of the image. Choose from 3 preset print areas or a user
Part of the image may be clipped from the print depending on the print size.
Copies a printed image size which is set W, M, or N in size. The
selected setting level is displayed as TOP, BOTTOM, LEFT and
RIGHT. These levels become the changing base.
Sets the printing area of the image. Adjust the size with [ or ]
Shifts the upper end of the image (setting area : 0 to -48)
Shifts the lower end of the image (setting area : 0 to -48)
Shifts the left end of the image (setting area : 0 to -63)
Shifts the right end of the image (setting area : 0 to -63)
When monochrome signal is input, colours may not be added to the characters
displayed on the monitor. In that case, set INPUT of ANALOG COLOR ADJ menu to
"B&W" in SERVICE MENU.
When SIZE is set to W or the minus value is increased on H-POSI, the monitor
screen may get darker according to the monitor connected. However, the image
will be printed correctly.
20mm x 15mm
30mm x 40mm
50mm x 50mm
30mm x 35mm
Printed image size of 1 image mode(mm)
Optional size by user