Panasonic CS-CE9NKE Operating Instructions Manual page 7

Press and hold for 5 seconds to dim or restore the
6
unit's indicator brightness.
Press and hold for approximately 10 seconds to
7
show temperature setting in °C or °F.
Press to restore the remote control's default setting.
8
Not used in normal operations.
9
TO SET THE TIMER TO SET THE TIMER
• 2 sets of ON and OFF timers are available to turn ON
or OFF the unit at different preset time.
• Complete below procedures to set each timer:
ON
Cancel
1
Cancel
OFF
Select ON or OFF timer
• Example of application at living room:
Morning: ON at 07:00 (Wake up)
OFF at 08:00 (Out for work)
Evening: ON at 17:00 (Back home)
OFF at 22:00 (Sleep)
• To cancel ON or OFF timer, press
select respective or
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
to select respective
OFF
• Upcoming timer will be displayed and will be activated
in sequence.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
on the back cover.
TIMER
2
SET
Set the
Confi rm
time
ON
or to
OFF
then press .
CANCEL
ON
or
SET
or then press .
7