Advertisement
Base station GUI control panel "Database" pane.
The base and client control panels are only slightly different. The following two figures show the
client station "Link" and "Database" panes. Again, the client software will operate in the "User" mode
and the information entries for device registration and channel list request are disabled and loaded
directly from system registry. Except the device and location information, the client station "Database"
pane doesn't contain other device registration information which is retrieved from the base station side.
The client station "Database" pane allows the user to change scan channel list in case the connection to
the base station is lost – the scan channel list has been set during installation and loaded from system
registry but the user is able to modify it.
9
Advertisement
