Table of Contents
Advertisement
REMOVAL & INSTALLATION
1.
Unplug the AC power cord and remove the batteries
before disassembling
the unit. Remove
cassettes
or CDs from the unit.
d
if bundles of wire are undone during the disassembly
process,
be sure to return them to their original state after operations
are
complete.
Make sure that you have the necessary
fixers (61 4129
4971) for bundling wire on hand beforehand.
Make sure that
lead wires are not too close to heat producing
parts such as heat sinks.
FRONT CABINET
2.
CD MAIN P.W.BOARD
& CD BASE MECHANISM
1. Remove
the BATTERY
LID.(O)
2. Remove
the 6 REAR
CABINET
mounting screws.(@)
3. Open the CASSETTE
LID.(O)
4. Remove
the VOLUME
and TONE
control knobs.(@)
1. Remove
the 3 CD MAIN
P. W. Board mounting
screws
to
remove the CD MAIN
P. W. Board. (~,@)
2. Remove
the 4 CD special screws to remove the CD BASE
MECHANISM.
(@,@)
3.
CD LID BLOCK
1. Remove
the 2 CD LID BLOCK
mounting screws.(~)
2. Remove
the CD LID BLOCK.(@)
5.
TAPE MECHANISM
& TUNEFVAMP
P.W.BOARD
-1
4.
CD DOOR
1.
Hook the CD DOOR
SPRING.(O)
2. Pushing the portion direction@
to open the CD DOOR.(O)
3. Remeve
the CD DOOR.(@)
4. Pull up the CHUKING
BRACKET
in the direction
of arrow
@to
remove the CHUKING
BRACKET
in the direction
of
arrow
@.
Advertisement
Table of Contents
