READYNAS
600
version B
☼ ☼
Prepare for Installation
Read this Guide before you install the disks.
Prepare the follows for the disk installation:
ReadyNAS 600 disk-less system
Disk drive brackets and screw in accessory box
Ethernet cable and power cable
Hard disk drives (not included)
Screw driver (not included)
1
Remove the top cover to access disk cage
ReadyNAS 600 case (version B)
2
Install the hard disk mounting brackets
the connector end
the components
side
Prepare SATA hard disk drives
Disk Installation Guide
Important instruction on how to install hard disks in your ReadyNAS
Remove the 3 screws in back.
4 x
16 x
Disk installation Accessories
Remove top cover
Install the bracket
to the new hard disk
the Components Side
F
F