Getting Ready - Kenwood K31GSS10E Instruction Manual

getting ready

This microwave is designed for domestic use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents on the microwave, and the door closes properly. A dented or damaged
microwave could allow microwave energy to escape. Make sure that you have taken all the
packaging from inside the microwave. Please dispose of the plastic wrappings or bags safely
and keep out of the reach of babies and young children.
2. Choose a flat work surface for your
microwave away from heat sources such
as radiators or fires and away from cold
areas.
You should allow a 10cm space all around
the microwave and 30cm above so that
warm air can escape from the vents during
cooking – This microwave is not designed
to be built in.
3. Plug your microwave into a standard
household electrical socket. Avoid using a
socket that also has an adaptor and other
equipment plugged in. Do not use a multi-
adaptor.
4. Put the turntable support inside the
microwave and place the glass turntable
plate on top of the support. The turntable
support is shaped to sit securely on the
spindle. You must always use the turntable
plate and support whenever you use the
microwave.
5. To protect your work surface, we
recommend that you fix some non-
slip cushion pads (not included) to the
underside of the microwave.
Remove the turntable plate and
turntable support before turning the
microwave upside down.
30cm
10cm
Underside View
GB
10cm
19