Checks After Reassembly - Hitachi ur 18dsl Technical Data And Service Manual

Connect the AC adapter, sliding-fit type battery, or plug-in type battery to the UR 18DSL, and then check
that the UR 18DSL can be turned on normally.
Check that the UR 18DSL can receive AM radio broadcasts normally
Check that the UR 18DSL can search for AM radio broadcasts normally
Check that the UR 18DSL can receive FM radio broadcasts normally
Check that the UR 18DSL can search for FM radio broadcasts normally
*1
Good reception environment: A place without walls and buildings that block radio waves and without
nearby equipment (e.g., fluorescent lamp, personal computer, battery charger, compressor) that
produces noise
*2
Reception of a radio wave depends on the direction of the broadcast station and orientation of the
antenna. If a broadcast cannot be received well, try to adjust the orientation of the FM antenna (or
orientation of the UR 18DSL for AM radio reception).
*3
Searching for a broadcast depends on the direction of the broadcast station and orientation of the
antenna. If a broadcast cannot be properly searched, try to adjust the orientation of the FM antenna (or
orientation of the UR 18DSL for AM radio reception).
While receiving an AM radio broadcast, tap the side of the UR18DSL with your hand, and then check that
noise does not increase or sound is not interrupted each time you tap the radio.
(If noise increases or the sound is interrupted, connectors may be loose or a circuit board may be faulty.)
While receiving an FM radio broadcast, tap the side of the UR 18DSL with your hand, and then check that
noise does not increase or sound is not interrupted each time you tap the radio.
(If noise increases or the sound is interrupted, connectors may be loose or a circuit board may be faulty.)

Checks after Reassembly

-16-
*2
in a good reception environment
*3
in a good reception environment
*2
in a good reception environment
*3
in a good reception environment
*1
.
*1
.
*1
.
*1
.