Download Print this page

Low Power Indication; Operation And Maintenance; Basic Operation; Cb Communication Codes - Uniden PRO401HH User Manual

Handheld cb radio
Hide thumbs

Advertisement

It will also turn off 1.5 seconds after you close Squelch.
To see the display again, open Squelch.

Low Power Indication

The red LED blinks when battery power is low. Replace/recharge the
batteries or connect to a power source.

OPERATION AND MAINTENANCE

BASIC OPERATION

Turning the
radio on
Turning the
radio off
Selecting a
channel
Changing the
volume
Transmitting
NOTE: Make sure you have read and understood part 95 of the
FCC rules and regulations before using the transmitter.

CB COMMUNICATION CODES

The "10" code allows you to communicate easier in noisy
environments. The following table lists some of the most common
codes and their meaning.
Turn the Volume knob clockwise until it clicks and
the 7 segment LED comes on.
Turn the Volume knob counter-clockwise until it
clicks and the 7 segment LED turns off.
Press the Channel UP or DOWN button on the side
to move up or down the channel list.
Turn the Volume knob clockwise to increase the
volume; turn it counter-clockwise to decrease the
volume.
– Tune the radio to the channel you want to
transmit on, and listen to make sure the channel
is clear.
– Press and hold the PTT button.
– Hold the microphone about 2 inches away from
your mouth and speak in a normal voice.
– Release the PTT button to listen for a response.
6

Advertisement

loading

  Also See for Uniden PRO401HH

  Related Manuals for Uniden PRO401HH