Device Configuration - D-Link DES-1228 Manual

4 SmartConsole Utility

Device Configuration

The Device Configuration in the SmartConsole Utility has five icons:
Device Settings
Device Password Manager
Multi Firmware Upgrade
DHCP Refresh
Web Access
and the , ,
Device Settings
Select a switch from the Device List. Click on this icon to launch the Device Settings window. Here you can
configure the Product Name, IP Address, Gateway, Subnet Mask, System Name, Location, Trap Host IP,
Switch Group Interval, and DHCP Client Setting of the Switch.
To apply the configuration, insert the correct device password in the Confirm Password box and then click
OK
device buttons for the Device List.
Figure 16 – SmartConsole Device Settings
1 1 3 3
D-Link Web Smart Switch User Manual