Sony CDX-M9900 Servise Manual
Sony CDX-M9900 Servise Manual

Sony CDX-M9900 Servise Manual

Fm/mw/lw compact disc players
Hide thumbs Also See for CDX-M9900:
Table of Contents

Advertisement

FM/MW/LW
Compact Disc Player
Operating Instructions
For installation and connections, see the supplied installation/connections manual.
CDX-M9900
© 2004 Sony Corporation
3-265-745-31 (1)
GB
CT

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Sony CDX-M9900

  • Page 1 3-265-745-31 (1) FM/MW/LW Compact Disc Player Operating Instructions For installation and connections, see the supplied installation/connections manual. CDX-M9900 © 2004 Sony Corporation...
  • Page 3 • Optional controller accessory Wired rotary commander RM-X4S Wireless rotary commander RM-X6S *1 This unit works with Sony products only. *2 ID3 tag is an MP3 file that contains information about album name, artist name, track name, etc. *3 A CD TEXT disc is an audio CD that includes information such as the disc name, artist name, and track names.
  • Page 4: Table Of Contents

    Table of Contents Location of controls ....6 Precautions ......8 Overview of RDS .
  • Page 5 Sound Setting Setting the BBE MP — BBE MP ..... . . 35 Quickly attenuating the sound — ATT ......35 Setting the Dynamic Soundstage Organizer —...
  • Page 6: Location Of Controls

    To skip tracks/fast-forward, reverse a track/ device is connected to AUX IN terminal of the unit. tune in stations automatically, find a station When you connect a Sony portable device and CD/ manually/select a setting. MD unit(s) at the same time, use the AUX IN h BACK button selector.
  • Page 7: Menu Button

    Menu: device is connected to AUX IN terminal of the unit. To decide an item/apply a setting of the When you connect a Sony portable device and CD/ menu item. MD unit(s) at the same time, use the AUX IN e Z (Open/Close) button selector.
  • Page 8: Precautions

    If you have any questions or problems concerning your unit that are not covered in this Be careful not to splash juice or other soft drinks manual, please consult your nearest Sony dealer. onto the unit or discs. On safety •...
  • Page 9: Notes On Discs

    • Before playing, clean the discs with a Notes on discs commercially available cleaning cloth. Wipe each disc from the centre out. Do not use solvents such as benzine, thinner, commercially • To keep discs clean, do not touch the surface. available cleaners, or antistatic spray intended Handle a disc by its edge.
  • Page 10: About Mp3 Files

    Music discs encoded with copyright About MP3 files protection This product is designed to play back discs that conform to the Compact Disc (CD) standard. MP3 (MPEG 1 Audio Layer-3) is a standard Recently, various music discs encoded with technology and format for compressing a sound copyright protection are marketed by some sequence.
  • Page 11 The playback order of the MP3 files Notes • With formats other than ISO 9660 level 1 and level 2, The playback order of the folders and files is as folder names or file names may not be displayed follows: correctly.
  • Page 12: Basic Operations

    Press (MENU). Basic operations The display returns to the normal display. During the menu operation: Main menu To return to the previous display, press (CUSTOM). You can set the various setting from the main To cancel the menu selection, press (MENU). menu.
  • Page 13: Pattern

    Shift menu Selecting the display mode The R dial functions in various ways depending on the shift menu selected. and display pattern Operation by the main unit: You can enjoy visual effects in various R dial ENTER combinations by selecting the display patterns in the display modes.
  • Page 14 Display modes and display patterns Video mode Displays video images and/or pre-stored The following display patterns are selectable spectrum analysers with various information. depending on the display mode, and setting items Example: Video & Spectrum Analyser in the menu differ depending on the selected display pattern.
  • Page 15: Getting Started

    Setting the clock and the Getting Started calendar — Clock Resetting the unit The clock uses a 24-hour digital indication. Before operating the unit for the first time, or Press (MENU). after replacing the car battery or changing the Press < or , repeatedly to select connections, you must reset the unit.
  • Page 16: Cd Player Cd/Md Unit (Optional)

    Operation by the main unit: CD Player Press (OFF). Stop playback CD/MD Unit (optional) Press Z. Eject the disc Skip tracks Rotate the R dial In addition to playing a CD with this unit, you – Automatic Music [until the desired track]. can also control external CD/MD units.
  • Page 17: Display Items

    (With optional unit) Display items Press (SOURCE) repeatedly until “CD,” “MD,” or “MS”* appears. Information on the disc/album/track currently selected is automatically displayed. Press (MODE) repeatedly until the If the Auto Scroll function is set to on, text desired unit appears. information exceeding 16 characters will be Playback starts.
  • Page 18: Playing Tracks Repeatedly

    *1 Available only when two or more optional CD (MD) units are connected. Playing tracks repeatedly *2 Only when the disc has been labelled by this unit using the Disc Memo function. — Repeat *3 Available only when an MP3 file is played. *4 Available only when an optional MD unit with the You can select: MDLP function is connected, and an MDLP disc is...
  • Page 19: Playing Tracks In Random Order

    Playing tracks in random Labelling a CD order — Disc Memo You can label each disc with a custom name of — Shuffle up to 16 characters. As a display item, the Disc You can select: Memo always takes priority over any original CD •...
  • Page 20: Locating A Disc By Name

    Erasing the Disc Memo Locating a disc by name — Name Delete — Disc List During playback, press (MENU). (With an optional CD unit, or an MD unit) Press < or , repeatedly to select “Edit,” then press (ENTER). You can use this function for discs that have been assigned custom names* or for CD TEXT Press <...
  • Page 21: Radio

    Display items Radio Information on the station/frequency currently The unit can store up to 6 stations per band selected is automatically displayed. (FM1, FM2, FM3, MW, and LW). Positions of display items differ depending on the selected face pattern. Caution For details, see “Selecting the face pattern”...
  • Page 22: Receiving The Stored Stations

    If FM stereo reception is poor Receiving the stored stations — Mono Set “Mono” in “PlayMode” to “ON.” Press (SOURCE) repeatedly to select The sound improves, but becomes monaural. the radio. To restore stereo reception, set to “OFF.” Press (MODE) repeatedly to select the desired band.
  • Page 23: Tuning In A Station Through A List

    Tuning in a station through a list — Preset List Overview of RDS You can select a preset station easily from the list. FM stations with Radio Data System (RDS) During radio reception, press (MENU). service send inaudible digital information along with the regular radio programme signal.
  • Page 24: Display Items

    Display items Automatic retuning for best reception results Information on the station/frequency/programme currently selected is automatically displayed. — AF Positions of display items differ depending on The alternative frequencies (AF) function allows the selected face pattern. the radio to always tune into the area’s strongest For details, see “Selecting the face pattern”...
  • Page 25: Receiving Traffic Announcements

    Staying with one regional programme Receiving traffic — Regional announcements When the AF function is on: this unit’s factory- set setting restricts reception to a specific region, — TA/TP so you won’t be switched to another regional station with a stronger frequency. By activating the Traffic Announcement (TA) If you leave this regional programme’s reception and Traffic Programme (TP), you can...
  • Page 26: Presetting Rds Stations With Af And Ta

    Presetting RDS stations with Tuning in stations by AF and TA setting programme type — PTY List When you preset RDS stations, the unit stores each station’s AF/TA setting (on/off) as well as You can tune in a station by selecting the type of its frequency.
  • Page 27: Setting The Clock Automatically

    During FM reception, press (PTY). Setting the clock The PTY List appears. automatically — CT The CT (Clock Time) data from the RDS transmission sets the clock automatically. The current programme type name appears if the station is transmitting the PTY data. Press (MENU).
  • Page 28: Image Settings

    Setting the character colour Image Settings — Char Color The setting items available in the menu differ You can select a character colour to contrast depending on the selected display pattern. against background images. For details on the display patterns, see “Selecting the display mode and display pattern”...
  • Page 29: Changing The Display Image Automatically

    Adjusting the character colour Changing the display image Press (MENU). automatically Press < or , repeatedly to select — Auto Image “Display,” then press (ENTER). Press < or , repeatedly to select You can change the display image automatically “Char Color,” then press (ENTER). at a specified speed.
  • Page 30: Selecting The Effect Pattern

    Selecting the effect pattern Selecting a wallpaper — Effect — Wallpaper The moving patterns appear as visual effects. You can set the image as a wallpaper. Press (MENU). Selecting the wallpaper Press < or , repeatedly to select Press (MENU). “Display,”...
  • Page 31: Setting A Panorama Image

    Selecting the images to be displayed Selecting the aspect ratio You can select: • USER – to display user stored images in — Aspect sequence. • ALL – to display pre-stored/user stored images You can deform or clip out images to fit the in sequence.
  • Page 32 Display patterns and image types Cinema2: An image with an aspect ratio of 2.35 to 1, with The following image types are available only the left and right sides of the image being depending on the selected display patterns in the enlarged to fill the display.
  • Page 33: Turning Off The Display Characters

    Turning off the display Storing the images characters — Snapshot You can store maximum 100 images from the — Auto Clear auxiliary equipment connected. You can turn off the text information automatically to enjoy images. The text Press (SCREEN) repeatedly to select information appears only when the source, disc, the Video mode.
  • Page 34: Selecting The Start-Up Image

    Deleting the stored image Selecting the start-up image — Picture Delete You can delete unnecessary stored images. — Opening You can select an image for the start-up screen. Press (MENU). Press < or , repeatedly to select Press (MENU). “Edit,” then press (ENTER). Press <...
  • Page 35: Sound Setting

    Setting the Dynamic Sound Setting Soundstage Organizer — DSO Setting the BBE MP If your speakers are installed into the lower part of the doors, the sound will come from below — BBE MP and may not be clear. The DSO (Dynamic Soundstage Organizer) The BBE MP process effectively adds warmth function creates a more ambient sound as if there and provides clear CD quality sound even from...
  • Page 36: Setting The Equalizer

    Adjusting the selected equalizer curve Setting the equalizer You can store and adjust the equalizer settings for frequency and level. — EQ7 Press (SOURCE) to select a source You can select an equalizer curve for 7 music (radio, CD, MD or AUX). types (Xplod, Vocal, Club, Jazz, NewAge, Rock, and Custom).
  • Page 37: Adjusting The Bass And Treble

    Adjusting the bass and treble Adjusting the front and rear volume — Bass/Treble — Balance/Fader Press (SOURCE) to select a source (radio, CD, MD or AUX). You can adjust the volume balance between right and left speakers (Balance), and front and rear Press (MENU).
  • Page 38: Adjusting The Subwoofer Volume

    Adjusting the cut-off frequency for the Adjusting the subwoofer front/rear speakers — HPF (High pass filter) volume To match the characteristics of the installed — Sub Woofer speaker system, you can select the cut-off frequency of the speakers. Press (SOURCE) to select a source Cut-off frequency (radio, CD, MD or AUX).
  • Page 39: Setting The Loudness

    Adjusting the cut-off frequency for the Setting the loudness subwoofer(s) — LPF (Low pass filter) — Loudness To match the characteristics of the connected The bass and treble will be reinforced to enjoy subwoofer(s), you can cut out the unwanted high clear sound at low volume.
  • Page 40: Connecting Auxiliary Audio Equipment

    CUSTOM button so as to perform the function Note easily. If you connect an optional Sony CD/MD unit, you The functions listed below are assignable: cannot connect any portable devices and cannot Screen - changes the display mode (page 13).
  • Page 41: Initializing The Unit

    Initializing the unit Setting the security code — Initialize — Security If you initialize the unit, all additionally stored This unit has a security function to discourage images are erased, and the unit returns to the theft. Input a 4-digit number as your security factory preset condition.
  • Page 42: Menus And Items

    After the security code setup is Menus and items completed Should you re-install the unit in another car or change the battery, the Check Code display Items in the menus differ depending on the appears after turning on the unit. source and display pattern in the display mode selected.
  • Page 43 Edit menu Display • Name Edit - assigns names to discs (page 19). Skin • Name Delete - deletes the disc name assigned (page 20). • Opening - selects the image as the start-up screen (page 34). Char Color Custom •...
  • Page 44 Sound Setup Clock OFF* Contrast DSO 1 DSO 2 Security DSO 3 Initialize Select OFF* Dimmer Xplod Vocal AUTO* Club Beep OFF* Jazz NewAge Video NTSC Rock PAL* Custom Commander Normal* Tune Reverse Initialize OFF* Bass * The default setting Treble Balance Sound menu...
  • Page 45: Using The Rotary Commander

    Custom Using the rotary commander Screen* You can also control the unit (and optional CD/ MD units) with a rotary commander (optional). First, attach the appropriate label depending on Mode how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls.
  • Page 46 By rotating the control When an MP3 file is played, you can select an album using the rotary commander. With this unit: Do this Skip albums Push in and rotate [once for – Album selection each album] the control. SEEK/AMS To continuously skip control albums, push in and rotate...
  • Page 47: Additional Information

    If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. + side up Fuse (10 A) Warning...
  • Page 48: Removing The Unit

    Remove the unit. Removing the unit 1 Insert both release keys together until they click. Remove the protection collar. Face the hook 1 Engage the release keys together inwards. with the protection collar. Orient the release key correctly. 2 Pull the release keys to unseat the unit.
  • Page 49: Specifications

    Note Inputs Telephone ATT control This unit cannot be connected to a digital preamplifier terminal or an equalizer which is Sony BUS system compatible. Illumination control terminal Design and specifications are subject to change Parking brake input without notice.
  • Page 50: Troubleshooting

    CD/MD playback Troubleshooting Playback does not begin. • Defective MD or dirty CD. The following checklist will help you remedy • Some CD-Rs/CD-RWs may not play due to problems you may encounter with your unit. its recording equipment or the disc Before going through the checklist below, check condition.
  • Page 51 Radio reception Image storing Preset tuning is not possible. Images cannot be stored. • Store the correct frequency in the memory. The number of images stored in this unit has • The broadcast signal is too weak. reached 100. t Delete unnecessary images, and store The stations cannot be received.
  • Page 52: Error Displays/Message

    If these solutions do not help improve the Error displays/Message situation, consult your nearest Sony dealer. Message Error displays Local Seek up/Local Seek down (For this unit and optional CD/MD changers) The Local seek mode is on during automatic The following messages will be displayed, and tuning (page 22).
  • Page 55 • CD TEXT 資訊(在播放 CD TEXT 光碟 * 時顯 示) 。 • 提供的操作附件 卡片式遙控器 RM-X144 • 選購的操作附件 有線旋轉式控制器 RM-X4S 無線旋轉式控制器 RM-X6S *1 此裝置僅與 Sony 產品一起使用。 *2 ID3 標記是一種 MP3 檔案 , 它包含了諸如樂曲集名稱 、 演員名和樂曲名稱等資訊。 *3 CD TEXT 光碟是一種音頻 CD,它包含了諸如唱碟名 稱、演員名和樂曲名稱之類的資訊。這些資訊記錄 在光碟上。...
  • Page 56 目錄 控制器位置 ......6 使用前注意事項 ..... 8 RDS 概述 ......22 光碟注意事項 ....... 9 顯示項目 ......23 關於 MP3 檔案 ...... 10 用於最佳接收效果的自動重調 基本操作 ......11 – AF ......23 選擇顯示模式和顯示圖案 .... 12 接收交通狀況通報節目 – TA/TP ......24 開始使用之前 用 AF 和 TA 設定預設 RDS 電台 ..25 復原本機...
  • Page 57 聲音設定 設定 BBE MP – BBE MP ....... 34 快速減弱音量 – ATT ......34 設定動態音響管理器 – DSO ......34 設定均衡器 – EQ7 ......35 調節低音和高音 – Bass/Treble ....36 調節前後揚聲器音量 – Balance/Fader ....36 調節超低音揚聲器的音量 – Sub Woofer ....37 設定響度...
  • Page 58: 控制器位置

    用來減弱音量。 按鈕 用來選擇音源。 *1 只有當在本機上播放時才有效。 g </, (SEEK 按鈕 -/+)按鈕 *2 當連接有選購的 MD 裝置時。 *3 只有當選購的 Sony 便攜式裝置連接到本機的 AUX IN 用來跳過樂曲 / 快進,倒退一個樂曲 / 自 端子時才有效。當您同時連接 Sony 便攜式裝置和 動調入電台,手動調台 / 選擇設定。 CD/MD 裝置時,請使用 AUX IN 選擇器。 h BACK 按鈕 *4 當連接有選購的 CD/MD 裝置時。...
  • Page 59 使用 L/R 撥盤之前,先推入並釋放 L/R 撥盤。 d ENTER 按鈕 使用後要儲存時再次推入。 CD/MD/ 收音機: 要來改變 R 撥盤的功能。 *1 只有當選購的 Sony 便攜式裝置連接到本機的 AUX IN 選單: 端子時才有效 。 當您同時連接 Sony 便攜式裝置和 CD/ 用來選定項目 / 使用選單項目的設定。 MD 裝置時,請使用 AUX IN 選擇器。 e Z (開 / 關)按鈕...
  • Page 60: 使用前注意事項

    關於濕氣凝結 使用前注意事項 在雨天或非常潮濕的地區,本機的透鏡和顯示 幕內會產生濕氣凝結。一旦如此,本機將無法 正常運行。此時,請將光碟取出,並等待約一 • 倘若您的座車停在直射陽光下,則在操作前 小時,直至濕氣蒸發。 須先使本機充分冷卻。 • 本機工作時,電動天線將自動伸出。 為保持高品質聲音 若您有什麼關於本機的問題或困難,而本說明 時刻小心,切勿將果汁或其它飲料濺在本機或 書沒有提及,請向您附近的 Sony 經銷商諮詢。 光碟上。 關於安全 • 請遵守貴國或地區的交通法規。 • 為了 您的安 全,當不使用停車煞 車時,從 VIDEO IN 傳來的影像將自動關閉。 防止事故的發生 本影像只有當您停車後並設置了停車煞車才 會出現。 當汽車開始起動時,在顯示下列警告後,從 VIDEO IN 傳來的影像將自動消失。 顯示幕上的影像被關閉,但是您能聽到 CD/ MP3 聲音。...
  • Page 61: 光碟注意事項

    具有版權保護編碼的音樂光碟 光碟注意事項 本產品是專為播放符合 Compact Disc (CD) 標準光碟而設計。最近,一些唱片公司在市場 上銷售各種具有版權保護編碼的光碟。請注 • 為保持光碟清潔,切勿接觸表面。拿取光碟 意,這些光碟中可能會有不符合 CD 標準的光 時請持其邊緣。 碟,且可能無法使用本產品播放。 • 不使用時請將光碟裝入光碟盒或光碟匣。 • 切勿使光碟受到熱源/高溫的影響 。 避免將光 CD-R (可錄 CD)/CD-RW (可重寫 CD) 碟遺留在停泊的車廂內 、 儀表盤或後托架上 。 注意事項 本裝置能播放下列光碟: 光碟類型 光碟上的標籤 音頻 CD • 切勿貼標籤 , 或使用帶有黏性墨水/殘留物的 光碟。這類光碟在使用時會停止轉動,從而...
  • Page 62: 關於 Mp3 檔案

    MP3 檔案的播放順序 關於 MP3 檔案 資料夾和檔案的播放順序顯示如下: 資料夾 MP3(MPEG 1 Audio Layer-3)是一項用於壓縮 (樂曲集) 聲音順序的標準技術和格式。可將檔案壓縮到 約為原大小的 1/10。超出人的聽覺範圍的聲音 MP3 檔案 被壓縮,而我們能聽到的聲音未被壓縮。 (樂曲) 光碟注意事項 您可以播放錄製在 CD-ROM,CD-R 和 CD-RW 上 的 MP3 檔案。 光碟必須是 ISO 9660* level 1 或 level 2 格 式,或是擴展格式中的 Joliet 或 Romeo。 您可以使用以...
  • Page 63: 基本操作

    按 (MENU)。 基本操作 顯示返回正常顯示狀態。 選單操作過程中: 主選單 若要回到前一個畫面,按 (CUSTOM)。 若要取消選單選擇,按 (MENU)。 您可以在主選單中設定各種設定值。在選單中 設定項目和功能的分類如下所示: 提示 List -顯示選單列表。 視選擇的項目而定,在步驟 3 中反覆按 (ENTER) 選擇 Display -設定顯示影像。 “ON”或 “OFF” ,然後按 (MENU) 返回至正常顯示。 Edit -編輯光碟名稱 / 控制儲存的內容。 用卡片式遙控器操作: Setup -設定本機的系統。 Sound -設定音質。 Custom -賦予 CUSTOM 按鈕功能。 PlayMode -設定播放和電台接收。...
  • Page 64: 選擇顯示模式和顯示圖案

    轉換選單 選擇顯示模式和顯示圖案 視所選擇的轉換選單而定,R 撥盤以各種方式 起作用。 通過選擇顯示模式中的顯示圖案,您可以以各 用主機操作: 種組合欣賞視覺效應。每個顯示模式有幾種顯 示圖案,並且這些圖案的視覺效應可以自訂。 R 撥盤 ENTER 用卡片式遙控器操作: OPEN/CLOSE SHUF 在播放中或無線電接收時 , 反覆按(ENTER) 直至顯示想要的轉換選單。 BBE MP PAUSE 轉換選單 CAPTURE SCREEN IMAGE IMAGE SCREEN DISC SOURCE – SEEK SEEK – DISC 每按一次 (ENTER) 按鈕,轉換選單變化如 下: 播放過程中: 在播放中或無線電接收時,反覆按...
  • Page 65 顯示模式和顯示圖案 視頻模式 顯示視頻影像和 /或先前儲存的有各種資訊的 視顯示模式而定,下列顯示圖案可供選擇,並 頻譜分析儀。 且選單中的設定項目因選擇的顯示圖案而異。 例如:Video & Spectrum Analyser 有關標準模式和視頻模式中設定顯示圖案的 詳細內容,請參見第 27 至 33 頁。 標準模式 顯示影像和 / 或先前儲存的有各種資訊的視覺 效應。 例如:Wallpaper & Effect 顯示圖案如下改變: Video full t Video & Spectrum Analyser t Video & Capture t Video & Slideshow 註...
  • Page 66: 復原本機

    設定時鐘和日曆 開始使用之前 – Clock ( 時鐘 ) 時鐘採用 24 小時制數字顯示。 復原本機 按 (MENU)。 在第一次使用本機前,或更換汽車電池或改變 反覆按 < 或 , 選擇 “Setup” ,然後按 連接後,必須使本機復原。 (ENTER)。 用尖物按復原按鈕,如原子筆。 反覆按 < 或 , 選擇 “Clock” ,然後按 按復原按鈕之後,開機影像出現並演示將自動 (ENTER)。 啟動。 設定日期和時間。 1 反覆按 M 或 m 選擇日 , 然後按 (ENTER) 。 2 按照步驟...
  • Page 67: Cd 播放機 Cd/Md 裝置 (選購件

    用主機操作: CD 播放機 要 按 (OFF)。 停止播放 CD/MD 裝置 (選購件) 退出光碟 按 Z。 跳過樂曲 轉動 R 撥盤 本機除播放CD外 , 還可控制外接的CD/MD裝置 。 - 自動音樂傳感器 [ 直至所需要的樂曲 ]。 跳過樂曲集* 按 (ENTER),然後轉動 R - 樂曲集選擇 撥盤 播放光碟 [ 直至所需要的樂曲集 ]。 跳過光碟 按 (ENTER),然後轉動 R - 光碟選擇...
  • Page 68: 顯示項目

    (使用選購裝置) 顯示項目 反覆按 (SOURCE) ,直至出現“CD” 、 “MD” 或 “MS” *。 自動顯示當前選擇的光碟 / 樂曲集 / 樂曲上的 資訊。 反覆按(MODE)按鈕直至顯示所要的裝置 。 若 Auto Scroll 功能設定為開,則超過 16 個 播放開始。 字元的文字資訊將被滾動顯示。 顯示項目的位置視選擇的版面樣式而異。 * MS:MG Memory Stick System-up Player MGS-X1 詳細情況,請參見第 27 頁“選擇版面樣式” 。 連接 MGS-X1 和 MD 裝置時的注意事項 本機將...
  • Page 69: Repeat

    *1 僅當連接兩台或更多選購的 CD (MD)裝置時有效。 *2 僅當光碟已用本機的唱碟記憶功能標註過時。 反覆播放樂曲 *3 僅在播放 MP3 檔案時有效。 *4 只有當連接了具有 MDLP 功能的 MD 裝置,而且播放 – Repeat MDLP 光碟時才有效。 您可以選擇: 若要滾動顯示文字資訊 • Track -重複當前樂曲。 • Album* -重複當前樂曲集中的樂曲。 – Auto Scroll • Disc* -重複當前光碟中的樂曲。 將 “Display”中的 “Auto Scroll”設定 為 “ON” 。 *1 僅在播放...
  • Page 70: Shuffle

    以隨機順序播放樂曲 標註 CD – Shuffle – Disc Memo ( 唱碟記憶功能 ) 您可以選擇: 您可以用最多 16 個字元的用戶名稱對每張光 • Album* -以任意順序播放當前樂曲集內的 碟進行標註。唱碟記憶內容作為顯示項之一, 樂曲。 其顯示總是優先於光碟中原有的 CD TEXT 資 • Disc -任意順序播放當前光碟中的樂曲。 訊。 • Magazine* -以任意順序播放當前選購 CD (MD)裝置中的樂曲。 開始播放要標註的光碟。 • ALL* -以任意順序播放所有連接的CD (MD) 按 (MENU)。 裝置...
  • Page 71: Disc List

    刪除唱碟記憶 通過名稱找出光碟 – Name Delete ( 名稱刪除 ) – Disc List 在播放過程中按 (MENU) 按鈕。 (使用選購的 CD 裝置或 MD 裝置) 反覆按 < 或 , 選擇 “Edit” ,然後按 您能對已命名的用戶名稱* 的光碟或對 CD (ENTER)。 TEXT 光碟* 使用此功能。 反覆按 < 或 , 選擇“Name Delete” ,然 後按...
  • Page 72: Btm (最佳調諧記憶功能

    顯示項目 收音機 自動顯示當前選擇的電台 / 頻率上的資訊。 本機在每一波段上 (FM1,FM2,FM3,MW 和 顯示項目的位置視選擇的版面樣式而異。 LW)最多可存儲 6 個電台。 詳細情況,請參見第 27 頁“選擇版面樣式” 。 注意 當選擇了 “Skin1” 。 當在駕車過程中要調諧電台時,須使用最佳調 諧記憶功能,以免發生事故。 自動存儲電台 – BTM (最佳調諧記憶功能) 本機在選定的波段上篩選訊號最強的電台,並 當選擇了 “Skin2” 。 按照頻率順序進行存儲。 反覆按 (SOURCE) 按鈕,選擇收音機。 反覆按 (MODE) 按鈕選擇想要的波段。 按 (MENU)。 反覆按 < 或 , 選擇 “Edit” ,然後按 (ENTER)。...
  • Page 73: 收聽已儲存的電台

    若 FM 立體聲的收音狀況不良 收聽已儲存的電台 - Mono 將“PlayMode” 中的“Mono” 設定為“ON” 。 反覆按 (SOURCE) 按鈕選擇收音機。 聲音狀況得到改善,但變成了單聲道。 反覆按 (MODE) 按鈕選擇想要的波段。 若要恢復立體聲接收,則設定為 “OFF” 。 收音機開始接收想要的波段。 提示 如果很難收聽到 FM 廣播,請將 “Sound”中的 “DSO” 設定為 “OFF” (第 34 頁) 。 用卡片式遙控器操作: 要 按 (OFF) 。 停止電台接收 僅儲存所要的電台 接收已存儲的...
  • Page 74: Preset List

    通過列表調入電台 – Preset List 您可以從列表中輕鬆地選擇預設電台。 RDS 概述 在無線電接收中,按 (MENU)。 反覆按 < 或 , 選擇 “List” ,然後按 帶收音機資料系統 (RDS)服務的 FM 電台在 (ENTER)。 發送常規的收音機節目訊號的同時還發送無 若選擇了 “MW”或 “LW” ,則出現 Preset 聲的數位資訊。例如,接收帶有 RDS 功能的電 List。跳至步驟 4。 台時,將顯示下列資訊之一。 若選擇了 “FM” ,則出現列表選擇顯示。 繼續操作步驟 3。 RDS 服務 反覆按...
  • Page 75: 顯示項目

    顯示項目 用於最佳接收效果的自動 重調 自動顯示當前選擇的電台 / 頻率 / 節目上的資 訊。 – AF 顯示項目的位置視選擇的版面樣式而異。 備用頻率 (AF)功能允許收音機始終將該地 詳細情況,請參見第 27 頁“選擇版面樣式” 。 區的最強訊號調入您正在收聽的電台。 當選擇了 “Skin1” 。 頻率自動改變。 96.0 MHz 98.5 MHz 電台 當選擇了 “Skin2” 。 102.5 MHz 選擇一個 FM 電台 (第 20 頁) 。 反覆按...
  • Page 76: Ta/Tp

    停留在一個地區節目 接收交通狀況通報節目 – Regional 當 AF 功能開啟:本裝置的工廠設定將電台接 – TA/TP 收限制在一個指定的地區,因此您無法切換至 通過開啟交通狀況通報節目 (TA)和交通節 頻率更強的另一個地區的電台。 目 (TP) ,您可以自動調入正在廣播交通狀況 如果您離開該地區節目的接收範圍或希望利 通報節目的 FM 電台。這些設定的使用與當前 用整個 AF 功能,請將 “PlayMode”中的 FM 節目或音源 (CD/MD,AUX)無關。當通告 “Regional”設定為 “OFF” (第 43 頁) 。 結束時,本機切回到最初的音源。 註 反覆按 (TA) 按鈕,直至 “TA”點亮。 本功能在英國及其他一些地區無效。 本機開始搜尋交通資訊電台。...
  • Page 77: 用 Af 和 Ta 設定預設 Rds 電台

    用 AF 和 TA 設定預設 RDS 通過節目類型調入電台 電台 – PTY List 您可以通過選擇想要收聽的節目類型來調入 預設 RDS 電台時,本機將儲存每個電台的 AF/ 電台。 TA 設定 (開 / 關)及其頻率。您可以為單獨 的預設電台選擇不同的設定 (AF,TA 或兩 節目類型 顯示 者) ,或者為所有的預設電台選擇相同的設 定。如果您開啟 “AF”預設電台,本機自動 新聞 News 儲存無線電訊號最強的電台。 當前事件 Current Affairs 資訊 Information 為所有的預設電台預設相同的設定。 體育節目...
  • Page 78: 自動設定時鐘 - Ct

    在 FM 接收中,按 (PTY) 按鈕。 自動設定時鐘 顯示 PTY 一覽表。 – CT 從 RDS 傳送的 CT (時鐘時間)資料自動設定 時鐘。 如果該電台正在發送 PTY 資料,則顯示當 按 (MENU)。 前的節目類型名稱。 按<或,選擇 “Setup” , 然後按(ENTER) 。 如果接收的電台為非 RDS 電台,或未接收 到 RDS 資料,則出現 “None”顯示。 按 < 或 , 選擇 “CT” 。 反覆按...
  • Page 79: Skin

    設定字元色彩 影像設定 – Char Color 選單中有效的設定項目視所選擇的顯示圖案 您可以選擇字元色彩,與背景影像形成對比。 而異。 有關顯示圖案的詳細內容 , 請參見第 12 頁 “選 選擇字元色彩 擇顯示模式和顯示圖案” 。 按 (MENU)。 反覆按 < 或 , 選擇“Display” ,然後按 選擇版面樣式 (ENTER)。 – Skin 反覆按 < 或 , 選擇 “Char Color” , 然後 按 (ENTER)。 您可以為播放...
  • Page 80: Auto Image

    調節字元色彩 自動改變顯示影像 按 (MENU)。 – Auto Image 反覆按 < 或 , 選擇“Display” ,然後按 您可以以指定的速度自動改變顯示影像。 (ENTER)。 反覆按 < 或 , 選擇 “Char Color” , 然後 按 (MENU)。 按 (ENTER)。 反覆按 < 或 , 選擇“Display” ,然後按 反覆按 < 或 , 選擇 “Custom” ,然後按 (ENTER)。...
  • Page 81: Effect

    選擇效應圖案 選擇壁紙 – Effect – Wallpaper 動態樣式作為視覺效應顯示。 您可以將影像設定為壁紙。 按 (MENU)。 選擇壁紙 反覆按 < 或 , 選擇“Display” ,然後按 按 (MENU)。 (ENTER)。 反覆按 < 或 , 選擇“Display” ,然後按 反覆按 < 或 , 選擇 “Effect” ,然後按 (ENTER)。 (ENTER)。 反覆按 < 或 , 選擇“Wallpaper” ,然後 反覆按...
  • Page 82: Panorama

    選擇要顯示的影像 選擇縱橫比 您可以選擇: • USER -用來依次顯示使用者儲存的影像。 – Aspect • ALL-用來依次顯示預先儲存的/使用者儲存 的影像。 您可以用選擇的縱橫比使影像變形或剪輯影 像以適合螢幕的大小。 按 (MENU)。 按 (MENU)。 反覆按 < 或 , 選擇“Display” ,然後按 (ENTER)。 反覆按 < 或 , 選擇“Display” ,然後按 反覆按 < 或 , 選擇“Wallpaper” ,然後 (ENTER)。 按 (ENTER)。 反覆按 < 或 , 選擇 “Aspect” ,然後按 反覆按...
  • Page 83 顯示樣式和影像類型 Cinema2: 縱橫比為 2.35 比 1 的影像,且只有影像的左 視在視頻模式中選擇的顯示樣式而定,下列影 右兩側增長以充滿顯示幕。 像類型有效。 當 選 擇 “Video & Spectrum Analyser”或 “Video full”時。 Standard1: 縱橫比為 4 比 3 的影像。 當選擇 “Video & Capture”或 “Video & Slideshow”時。 Standard3: Wide1: 縱橫比為 4 比 3 的影像,且只有影像的左右兩 縱橫比為 16 比 9 的影像。 側增長以充滿捕捉和幻燈片放映模式。...
  • Page 84: Auto Clear

    關閉顯示字元 儲存影像 – Auto Clear – Snapshot 您可以自動關閉文字資訊欣賞影像。僅當當前 您可以從連接的輔助設備中最多儲存100個影 選擇的音源、光碟、樂曲集或樂曲改變時,才 像。 顯示文字資訊。 反覆按 (SCREEN),選擇視頻模式。 按 (MENU)。 反覆按 (IMAGE) 按鈕,選擇想要 Video & 反覆按 < 或 , 選擇“Display” ,然後按 Capture 模式 ( 第 13 頁 )。 有關改變縱橫比的詳細內容,請參見第 30 (ENTER)。 頁 “選擇縱橫比” 。 反覆按...
  • Page 85: Opening

    刪除儲存的影像 選擇開機影像 – Picture Delete 您可以刪除已儲存的不需要的影像。 – Opening 您可以選擇一個影像作為開機螢幕。 按 (MENU)。 反覆按 < 或 , 選擇 “Edit” ,然後按 按 (MENU)。 (ENTER)。 反覆按 < 或 , 選擇 “Edit” ,然後按 反覆按 < 或 , 選擇 “Picture Delete” , (ENTER)。 然後按 (ENTER)。 反覆按 < 或 , 選擇“Opening” ,然後按 反覆按...
  • Page 86: 設定 Bbe Mp

    設定動態音響管理器 聲音設定 – DSO 若您的揚聲器裝在車門的較低部位,則聲音將 從下面傳出,且可能不清晰。 設定 BBE MP DSO (動態音響管理器)功能創造出更加環繞 的聲音,好似在儀表板上裝有多個揚聲器(虛 – BBE MP 擬揚聲器) 。 您可以為每個音源存儲 DSO 設定。 BBE MP 處理可有效地新增親切感,並使嚴重 壓縮過的 MP3 素材產生清晰的 CD 音質。 DSO 模式和虛擬揚聲器的成像 在本機上播放時,按 (5)(BBE MP)按鈕, 選擇 “BBE MP ON” 。 要取消 BBE MP,則選擇 “BBE MP OFF” 。 註...
  • Page 87: Eq7

    調節選擇的均衡曲線 設定均衡器 您可以存儲和調節均衡器設定的頻率和電平。 – EQ7 按 (SOURCE) 按鈕選擇音源(收音機、CD、 MD 或 AUX) 。 您可以為 7 種音樂類型(Xplod,Vocal,Club, Jazz,NewAge,Rock,和 Custom)選擇均衡 按 (MENU)。 曲線。 反覆按 < 或 , 選擇 “Sound” ,然後按 您可以為每個音源調節不同的均衡設置。 (ENTER)。 選擇均衡曲線 反覆按 < 或 , 選擇 “EQ7” ,然後按 (ENTER)。 按 (SOURCE) 按鈕選擇音源(收音機、CD、 反覆按...
  • Page 88: Bass/Treble

    調節低音和高音 調節前後揚聲器音量 – Bass/Treble – Balance/Fader 您可以調節左右揚聲器 (Balance)和前後揚 按 (SOURCE) 按鈕選擇音源(收音機、CD、 聲器 (Fader)之間的平衡。 MD 或 AUX) 。 按 (SOURCE) 按鈕選擇音源(收音機、CD、 按 (MENU)。 MD 或 AUX) 。 反覆按 < 或 , 選擇 “Sound” ,然後按 按 (MENU)。 (ENTER)。 反覆按 < 或 , 選擇 “Sound” ,然後按 反覆按...
  • Page 89: Sub Woofer

    調節前 / 後揚聲器的截止頻率 調節超低音揚聲器的音量 – HPF (高通濾波器) 為了與所安裝的揚聲器系統特性相匹配,您可 – Sub Woofer 以選擇揚聲器的截止頻率。 按 (SOURCE) 按鈕選擇音源(收音機、CD、 截止頻率 MD 或 AUX) 。 關閉 按 (MENU)。 反覆按 < 或 , 選擇 “Sound” ,然後按 (ENTER)。 反覆按 < 或 , 選擇 “Sub Woofer” , 然後 按...
  • Page 90: Loudness

    調節超低音揚聲器截止頻率 設定響度 – LPF (低通濾波器) 為了與所連接的超低音揚聲器特性相匹配,您 – Loudness 可以截斷不需要的高頻和中頻訊號進入超低 低音和高音將被增強,以在處於低音量時欣賞 音揚聲器。通過設定截止頻率 (見下圖) ,超 清晰的聲音。 低音揚聲器將僅輸出低頻訊號,使您能獲得更 清晰的聲音。 按 (SOURCE) 按鈕選擇音源(收音機、CD、 截止頻率 MD 或 AUX) 。 關閉 按 (MENU)。 反覆按 < 或 , 選擇 “Sound” ,然後按 (ENTER)。 反覆按 < 或 , 選擇 “Loudness” 。 反覆按...
  • Page 91: 連接輔助音頻裝置

    本機上的 AUX IN (外部音頻輸入)端子也用 作 BUS AUDIO IN (音頻輸入)端子。 通過連接一個選購的 Sony 便攜式裝置,您可 設定用戶功能 以從汽車揚聲器收聽聲音。 註 – Custom 如果連接了一個選購的 Sony CD/MD 機,則您不能再連 接任何便攜式裝置,並且不能選擇 “AUX” 。 您可以將想要的一種功能設定至CUSTOM按鈕 , 以便輕鬆地操作該功能。 以下列出的功能可以指定: 選擇輔助裝置 Screen -改變顯示模式 (第 12 頁) 。 反覆按 (SOURCE) 按鈕,選擇 “AUX” 。...
  • Page 92: Initialize

    對本機進行初始化 設定安全密碼 – Initialize – Security 如果您對本機進行初始化,則所有另外儲存的 本機具有防盜安全功能。輸入 4 位數作為您的 影像被消除,並且本機返回至出廠預設狀態。 安全密碼。 以下列出的項目被初始化。 如果設定了安全密碼,則一旦您將本機重新安 Setup (Contrast,Dimmer,Video, 裝到其它汽車中或更換電池後,需要輸入已儲 Commander,Security) , 存的密碼才能打開本機。 Edit (Name Edit,Name Delete,Picture Delete,Opening) , 按 (MENU)。 Display (Skin,Char Color,Auto 按 < 或 , 選擇 “Setup” ,然後按 Image,Effect,Wallpaper,Panorama, (ENTER)。 Aspect,Auto Clear,Auto Scroll)...
  • Page 93: 選單和項目

    完成安全密碼設定後 選單和項目 一旦您將本機重新安裝到其它汽車上或更換 電池,則打開本機後將出現確認密碼顯示。 選單中的項目因音源和選擇的顯示模式中顯 密碼輸入顯示 示圖案而異。 您可設定以下項目: 列表選單 • Disc List -顯示唱碟名稱一覽表 (第 19 頁) 。 • Preset List -顯示電台名稱一覽表 用主機操作: (第 22 頁) 。 • PTY List-顯示節目類型一覽表 (第25頁) 。 轉動 R 撥盤選擇第一位數字,然後按 (ENTER)。 List 重複步驟 1 輸入第二位 、 第三位和第四位數 Disc List 字,然後按...
  • Page 94 Display Edit Skin Name Edit Name Delete Select ALL* Char Color Custom Opening Blue Picture Delete Select White* ALL* Green Pink * 預設設定 Yellow 設定選單 Purple • Clock -設定時鐘和日曆 (第 14 頁) 。 Black • Contrast -調節顯示幕對比度。 Auto Image OFF* •...
  • Page 95 聲音選單 用戶選單 • DSO -設定 DSO 模式 (第 34 頁) 。 • Screen -改變螢幕模式 (第 12 頁) 。 • EQ7 -調節均衡曲線設定 (第 35 頁) 。 • AF -開啟或關閉 AF 功能 (第 23 頁) 。 • Bass -調節低音電平 (第 36 頁) 。 •...
  • Page 96: 使用旋轉式控制器

    通過轉動控制器 使用旋轉式控制器 您也可用旋轉式控制器 (選購件)控制本機 (和選購的 CD/MD 裝置) 。 首先,根據您設想的旋轉式控制器安裝方式貼 上合適的標籤。 SEEK/AMS 控 旋轉式控制器通過按按鈕和/或轉動控制器進 制器 行操作。 轉動然後鬆開,即可: - 跳過樂曲。 要連續跳過樂曲,轉動一次並在 2 秒鐘 之內再次轉動並握住控制器。 D S P L S E L - 自動調入電台。 M O D E M O D E 轉動、握住,然後鬆開,即可: S E L D S P L - 快進...
  • Page 97: 附加資訊 保養

    更換保險絲 更換保險絲時,必須確保所使用的保險絲與原 使用選購裝置: 保險絲的額定安培數相同。若保險絲燒斷,請 要 操作 檢查電源連接並再更換保險絲。若保險絲更換 後又被燒斷,則可能是內部故障。此時,請向 跳過光碟 推入並轉動控制器 [ 每張 最近的 Sony 經銷商諮詢。 - 光碟選擇 光碟操作一次 ]。 要連續跳過光碟,推入並 轉動一次並在 2 秒鐘之內 再次轉動 (並握住)控制 器。 跳過樂曲集 1 要 進 入 樂 曲 集 選 擇 模 - 樂曲集選擇 式,推入,然後轉動並...
  • Page 98: 拆卸本機

    更換鋰電池 拆卸本機 一般情況下,電池能維持大約一年的時間。 (使用壽命可能會變短,這取決於電池的使用 狀況。) 當電池的電力變弱時,卡片式遙控 拆卸保護環。 器的操作距離將變短。此時,請更換一個新的 CR2025 鋰電池。使用其他電池可能有引起火 1 將開鎖鑰匙與保護環嚙合。 災或爆炸的危險。 正確定位開鎖鑰匙。 2 拉出開鎖鑰匙以拆下保護環。 + 極面朝上 取出裝置。 1 將兩把開鎖鑰匙一起插入,直至聽到喀 嗒聲。 掛鉤朝裡面。 鋰電池的注意事項 • 鋰電池應放在兒童不易觸及的地方。萬一誤 吞了電池,請立即找醫生。 • 用乾布擦拭電池,以保持接觸良好。 • 安裝電池時,必須保証極性正確。 • 別用金屬鑷子去夾電池,否則會引起短路。 2 拉出開鎖鑰匙,使裝置脫離原位。 3 將本機從安裝位置滑出。...
  • Page 99 輸出 音頻輸出 (前 / 後) Mobile DVD 播放機 超低音揚聲器輸出 DVX-11A (單聲道) 音源選擇器 電動天線繼電控制端子 XA-C30 功率放大器控制端子 AUX-IN 選擇器 輸入 電話 ATT 控制端子 XA-300 照明控制端子 停車煞車輸入端子 註 BUS 控制輸入端子 本裝置不能連接至與 Sony BUS 系統相容的數位前置放 BUS 音頻輸入 /AUX IN 大器或均衡器。 端子 天線輸入端子 設計和規格若有變更,恕不另行通知。 視頻輸入端子...
  • Page 100: 故障排除

    CD/MD 播放 故障排除 無法開始播放。 • MD 有缺陷或 CD 髒了。 下列檢查表有助於解決您使用本機時可能遇 • 由於錄製裝置或光碟狀況,有些 CD-R/ 到的問題。 CD-RW 可能無法播放。 在使用下面的檢查表之前,請檢查連接和操作 無法播放 MP3 檔案。 步驟是否正確。 • 未依照ISO 9660 level 1或level 2格式 , 或擴展格式中的Joliet或Romeo進行錄製 。 一般情況 • 未將檔案擴展名 “.MP3”加入檔案名稱。 • 檔案未以 MP3 格式儲存。 操作按鈕無效。 按復原按鈕。 未正確顯示樂曲集名稱...
  • Page 101 無線電接收 影像儲存 不能預設調諧。 影像不能被儲存。 • 將正確的頻率存儲在記憶體內。 儲存在本機上的影像數量已經達到 100 個。 • 廣播訊號太弱。 t 刪除不需要的影像,並再次儲存。 無法接收電台。 當儲存影像時按鈕和撥盤不起作用。 有噪音干擾。 裝置正在進行儲存影像。在此過程中,只有 • 請連接電動天線控制導線(藍色)或附件 光碟退出、聲音減弱和音量控制有效。 電源導線 (紅色)至汽車天線升壓器的電 t 請稍後,直至影像儲存完成。 源導線。 (只有當您的汽車僅在後 / 側玻 無法選擇視頻模式。 璃內有內置 FM/MW/LW 天線時。) • 視頻裝置未連接在本裝置的 VIDEO IN 端 • 檢查汽車天線的連接。 子,或者視頻訊號沒有從所連接的視頻裝 •...
  • Page 102: 出錯顯示 / 資訊

    Disc NO Music 插入了不包含音樂檔案的 CD。 t 插入音樂 CD。 Not Ready MD裝置的蓋子被打開或MD未被正確地裝入 。 t 關上蓋子或正確地裝入 MD。 Offset 可能發生內部故障。 t 檢查電源的連接。如果此出錯指示仍然 顯示在顯示幕中,請聯繫就近的 Sony 經 銷商。 Push Reset • 因某些原因本機不能工作。 • 因某些原因 CD/MD 裝置不能工作。 t 按下本機的復原按鈕。 如果這些解答仍無法助您改善情況,請向距您 最近的 Sony 經銷商諮詢。 資訊 Local Seek up/Local Seek down 在自動調諧時,Local Seek 模式為開啟狀...
  • Page 104 • Lead-free solder is used for soldering certain parts. • Halogenated flame retardants are not used in the certain printed wiring boards. • Halogenated flame retardants are not used in cabinets. • Paper is used for the packaging cushions. Sony Corporation Printed in Korea...

Table of Contents