Receiving The Stored Stations; Storing Only Desired Stations - Sony CDX-M9900 Servise Manual
Fm/mw/lw compact disc players
Hide thumbs
Also See for CDX-M9900:
- Operating instructions manual (270 pages) ,
- Service manual (59 pages) ,
- Installation/connections (5 pages)
Table of Contents
Advertisement
Receiving the stored stations
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
desired band.
Radio reception of the desired band starts.
Operation by the card remote commander:
To
Press (OFF).
Stop radio
reception
Press (1) to (6).
Receive stored
Press M/m
stations
– Preset search
[until the desired station].
Press </,
Search stations
– Automatic tuning
[until the desired station].
Press </,
Specify
frequencies
[hold until the desired
– Manual tuning
frequency].
Operation by the main unit:
To
Press (OFF).
Stop radio
reception
Receive stored
Rotate the R dial
stations
[until the desired station].
– Preset search
Press (ENTER) once, then
Search stations
– Automatic tuning
rotate the R dial*
[until the desired station].
Press (ENTER) twice, then
Specify
frequencies
rotate the R dial
– Manual tuning
[until the desired
frequency].
* To stop searching, rotate the R dial in the reverse
direction.
Tip
If automatic tuning stops too frequently, set “Local” in
“PlayMode” to “ON.” Only the stations with relatively
strong signal will be tuned in (Local seek mode).
If FM stereo reception is poor
— Mono
Set “Mono” in “PlayMode” to “ON.”
The sound improves, but becomes monaural.
To restore stereo reception, set to “OFF.”
Tip
If FM broadcasts are difficult to hear, set “DSO” in
“Sound” to “OFF” (page 35).
Storing only desired stations
You can manually preset the desired stations on
any chosen preset memory.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
desired band.
3
Press < or , to tune in the station
that you want to store.
4
Press the desired number button ((1)
to (6)) for 2 seconds until “Memory”
appears.
The number of the button you pressed is
displayed, and then the selected station is
assigned to this number and stored.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
Page 22
Advertisement
Chapters
Table of Contents
