Yamaha YDRE Owner's/Operator's Manual page 31

MAINTENANCE
Installation
1
The AC line connected to the charger
must be capable of supplying 12
Amperes to the charger. AVOID
connecting a charger and another
2
device to a single 15A/20A circuit or
the circuit may become overloaded.
Also, maximum Ampere varies
3
depending on AC voltage. Please
refer to "AC Input" in General
Specifications.
4
RISK OF FIRE - Use this charger
only on circuits with a 15-amp or
5
higher branch circuit protection
(circuit breaker or fuse) in
accordance with the national
6
electrical code, ANSI/NFPA 70, and
all applicable local codes and
ordinances.
7
When using an extension cord,
use only a grounded, 3-wire, 12-
AWG cord no longer than 50'
(15 m). The use of an improper
8
extension cord could result in a
risk of a fire or electric shock.
9
10
11
7-4
The output of chargers with
greater than 48 volts may pose an
energy and/or shock hazard under
normal use.
JW2