Adjusting The Iris; Adjusting The Iris Manually; Using The Auto Iris - Sony scl-z18x140 Operating Instructions Manual

5
Press and hold the E.f. adjustment
button and STEADY SHOT button for
2 seconds or longer.
The adjustment begins.
During adjustment, the flange focal
length adjustment indicator of the lens
flashes and the in-progress message is
displayed.
When the adjustment is finished, the
completion message is displayed and
the flange focal length adjustment
indicator goes dark.
To activate automatic
adjustment of the flange focal
length from the menu of the
camcorder
1 Press the MENU button of the
camcorder to set the camcorder to
Menu mode.
2 Select
then "Auto FB Adjust" from the
menu.
3 Select "Execute."
LENS FILE
I n f ormat i on
Opera t i o n
Set t i ng
Auto FB Adjust
00:00
For details on menu operations, refer to the
instructions supplied with your camcorder.
If you press the CANCEL button of
the camcorder during adjustment
Automatic adjustment of the flange focal
length is aborted and the condition before
starting the adjustment is resumed.
If the adjustment fails
An error message is displayed.
Check the conditions of the subject and
lighting then perform the adjustment again.
26

Adjusting the Iris

(the LENS FILE menu)
B
B
B
Execute
Cancel
Adjusting the Iris
Adjust the iris opening according to the
brightness of the subject.
Iris ring

Adjusting the Iris Manually

1
Set the IRIS switch to MANUAL.
2
Rotate the iris ring for the desired iris
opening.
For details on adjusting the iris, refer to the
instructions supplied with your camcorder.

Using the Auto Iris

When the IRIS switch is set to AUTO, the
lens adjusts the iris automatically according
to the brightness of the subject.
IRIS switch