Timer Mode - NEC N920E Operating Instructions Manual

Table of Contents

Advertisement

N920E(¿ )-861H0S 02.2.8 6:15 PM ˘ ` 11

TIMER MODE

Timer operates as a minute timer, can be set to delay cooking and used to set a holding time after
cooking.However delay cooking can not be programmed for defrost. Timer operates without
microwave energy.
HOW TO USE AS A MINUTE TIMER
Timer
2. Press the amount of time you want to count down.
3. Touch START pad.
The TIMER indicator starts blinking and the display counts down the time remaining in TIMER mode.
When TIMER mode ends, you will hear 3 beeps.
HOW TO USE TO DELAY THE START OF COOKING
Timer
2. Press the amount of time you want to delay.
3. Program the desired power level and cooking time for
food to be cooked.
4. Touch START pad.
When you touch START pad, the TIMER indicator starts blinking and the display counts down the time
remaining in TIMER mode. When TIMER mode ends, the oven will beep. The TIMER indicator goes
off and M/W indicator starts blinking. The display counts down the time remaining in M/W mode. When
M/W cook ends, you will hear 3 beeps.
HOW TO USE TO SET A HOLDING TIME
1. Program the desired cooking Time.
Timer
3. Press the amount of time you want the oven to hold.
4. Touch START pad.
The M/W indicator starts blinking and the display counts down the time remaining in M/W mode. When
the M/W cook ends, the oven will beep. The M/W indicator goes off and TIMER indicator starts
blinking. The display counts down the time remaining in TIMER mode. When the TIMER mode ends,
you will hear 3 beeps.
NOTE: Your oven can be programmed for 59 minutes 90 seconds. (59:90)
1. Touch Timer pad.
1. Touch Timer pad.
2. Touch Timer pad.
The TIMER indicator lights and " : 0" is
displayed.
The display will show what you touched.
The TIMER indicator lights and " : 0" is
displayed.
The display will show what you touched.
The M/W indicator lights and the selected
power level & cooking time are displayed.
The M/W indicator lights and the selected
time is displayed.
The TIMER indicator lights and " : 0" is
displayed.
The display will show what you touched.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents