Advertisement
Quick Links
1
First starting
or after a longer period of non-use
Remove foil
Fill tank
Place a container
ESSENZA M100
Machine switches
off automatically
and is
blocked for 30 min
Open
(1.)
and hold (2.)
2.
Instruction Manual
1.
Schliessen
Close
Please read this Instruction Manual and the safety instructions before operating the appliance!
Before longer period of non-use, for frost protection, repair:
2
Daily:
before the 1st coffee
When
READY:
Start
Stop
1 min
Plug mains +
Rinse
Let water run through
Fill with fresh water
Switch ON
Heating up
switch ON
8
b
No water
see:
Slowly
flashing(1 x per
sec):
Preheating, coffee, rinsing
Button ON/OFF
Lights up:
Coffee outlet
READY
Coffee button
Fast flashing
(2 x per
sec):
Capsule container for 12 – 14 capsules **
Emptying, Descaling
Drip grid **
Irregular interval blinking:
Drip tray **
Send machine to repair
solvent
dish
abrasive
containing
washer
Press
hold
Damped cloth,
Rinse and
Empty capsule
and press 3 x
Switch off
cleaning agent mild
empty tank
container + drip tray
Switch off
6
5
When necessary:
After the last coffee:
Empty system
Clean
Daily
3
Espresso
Lungo
7
Descaling
Carefully read safety instructions on
1.
Start
Stop
decalcifier package.
2.
Decalcifier is aggressive to surface of casing.
Preparation
Preheat espresso cup:
Insert
READY
1 cup of water
3.
1. 2.
capsule
a
Remove capsule
Lever
Start
b
Fill in descaling kit
fluid and 0.5 l water
Flow speed
Water tank **
depends on
coffee variety
Descaling
** Spare parts
c
OK
Press simultaneously
for 3 seconds
Stop
Eject capsule
(drops into capsule container)
Rinse
d
4
Remove filter
8
Troubleshooting
Check mains: plug, voltage, fuse. In case of problems
Water hardness
Descale after
a
No indication
call NESPRESSO Club
fH
dH
36
20
300
No coffee,
1
b
Water tank empty –> fill water tank
18
10
600
no water
when rinsing
0
0
1200
2
2.
Start
Venting
1.
1. Open + 2. hold
Water comes
If leakage
see:
8
3
d
Machine blocked –> point 6
Empty drip tray and
Rinse machine, see 1
4
Descale, if necessary –> point 7
capsule container
2. 1.
3.
c
Coffee not hot enough
Preheat cup, descale if necessary
d
Capsule area leaking
Position capsule correctly.
(water in capsule container)
If leakage: call NESPRESSO Club
Place a recipient
1. Lift lever 2. insert filter
3. close lever
e
Vinegar: Danger of damage
Irregular interval blinking
Send machine to repair or call NESPRESSO Club
Start
Stop
Specifications
Optional Accessory
90 sec
. . . . . 220 - 240 V, 50 Hz, max. 1260 W
Refill descaling solution
Let decalcifier run through 2 times
one time back into tank
. . . . . max. 19 bar
. . . . . ~ 3 kg
. . . . . 1 l
NESPRESSO descaling kit
OFF
. . . . . 5
o
C ... 45
o
C
. . . . .
16.6 cm
25.2 cm
29.1 cm
Empty, rinse, clean and fill tank
Rinse machine, see 1
Safety precautions
This appliance may become a safety
hazard if these instructions and
Keep this instruction manual
safety precautions are ignored.
any evidence of damage. In such cases
unless they have been given the necessary
Emergency:
Immediately remove plug from power
inform Nespresso Club immediately for
supervision and prior instructions about how to
socket.
further assistance.
use this appliance by a person responsible for
their safety. Young children should be supervised
The appliance is intended to prepare
• Always close lever, never lift during
to ensure that they do not play with the appliance
beverages according to these
operation. - Do not put fingers into
instructions.This appliance is intended to be
capsule compartment and capsule shaft,
Before cleaning/care, unplug the
used in household and similar applications
danger of injury. • Do not use appliance
appliance and let it cool down.
Stop
such as: staff kitchen areas in shops, offices
without drip tray and drip grid.
• Never immerse either the whole machine,
and other working environments; farm houses;
• Keep appliance/cable out of reach of children.
power cord or plug, in water or any other
by clients in hotels, motels and other residential
Do not place power cord by hot parts
fluids.
type environments; bed and breakfast type
or sharp edges, etc. • Never touch cable
Descaling:
environments. Do not use the appliance for
with wet hands. • Do not unplug by pulling
7c) Do not lift lever during
Close
other than intended use. Remove plug from
the cord.
descaling process. 7d) Rinse the water tank
from socket if not in use for long periods - holiday
• In case of damage, do not use the appliance.
and clean the machine to avoid any residual
etc.
In order to avoid danger have repairs and
descaling agent.
Check that the voltage quoted on the
replacement of power cord only by Nespresso
Packaging is made of recyclabe
rating plate is the same as your
Club.
materials
voltage. • Connect the appliance only to power
Do not open appliance and do not put
Unplug the machine and cut off the
sockets with protective earth. The use of
anything into openings. All operations
incorrect connection voids warranty.
power cord near housing. Dispose
other than normal use, cleaning and care must
of machine and cable at your public
Place on a flat, stable heat-resistant
be performed by Nespresso Club.
disposal depot, or contact Customer
work surface away from water splashes
This appliance has not been designed to
Services for further assistance.
and any heat sources.
be used by persons (including children)
Do not use machine if it is not in
with physical, sensory or mental impairments
perfect working order, or if there is
or who are lacking in experience or knowledge,
FOR UK AND REPUBLIC OF IRELAND ONLY
WARNING
: Always replace the fuse cover of the fitted plug, never use the plug with the fuse cover omitted.
If a replacement fuse cover is required, ensure it is the same as the one visible on the pin face of the plug
(i.e. RED or ORANGE).
Fuse covers are available from: BBS Ltd
Po Box 110
Farnham Surrey GU104XL
Phone : 01252 727755
Use a 13 A fuse approved by ASTA to BS1362, marked thus
WARNING
: a plug with a bared flexible cord is hazardous if engaged in a live socket. If the fitted plug
has been cut from the power supply cord, it should be destroyed and replaced with a three pin plug in
accordance with the following code: BLUE : neutral
BROWN : live
GREEN/YELLOW : earth
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the
letter "N" or coloured BLUE or BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with
the letter "L" or coloured BROWN or RED which is connected to the fuse.
The wire which is coloured GREEN/YELLOW should be connected to the terminal marked with the letter
"E", or by the earth symbol or coloured GREEN or GREEN/YELLOW.
earth symbol
1005
Advertisement
