Options; Dvanced Call Functions; Call Waiting; Conference Call - JabloCom GDP-04i User Manual

Options

Some special functions are selectable under the o
• Silent mode / Normal mode
This function allows switching to the silent mode where all sound alerts and rings are disabled. This allows a user to
stay connected to the network while not being disturbed by incoming calls or text messages.
• Switch Off
This function turns off the phone. When turned off, the phone cannot make or receive any calls or text messages.
The battery charging function is active whenever the power adaptor is connected, even when the phone is switched
off. The battery charger progress indicator on the display will be active when the phone is off, if the battery is charg-
ing.
The phone can also be switched off by pressing
In order to switch the phone back on, press and hold
the display.
The phone will start automatically when the power cable from the adaptor is re-connected into the
phone.
• Travel mode Off
This feature ensures that the phone will not be switched on accidentally. Travel mode is active only when the phone is
powered from the battery only.
To switch the phone on again from the travel mode, press and hold
type the word "START" on the character keyboard or connect the power adaptor again.
• Cell lock
If the cell lock function is available on your network and your GSM service provider activated it on your SIM card, you
can see a icon while connected within the home location.
Advanced call functions
Some of the advanced call functions will not work properly unless they are supported by your GSM
operator.

Call Waiting

The call waiting function indicates an incoming call even when another call is in progress.
To use the call waiting function, please check that you have activated it in the GSM network setting –
see chapter Settings.
If a new incoming call is indicated, press
function by using the selection key. The first call is put on hold. To switch between the calls press
Either call can be canceled by

Conference Call

The conference call function is a network service that allows up to six people to take part in a conference call.
To arrange a conference call:
• Establish a call to the first participant
• To add new participant into the conference call enter the phone number directly and press
contact from phonebook and press the s
pressing the o
Ptions
When the new call has been answered, press o
•
the display.
• To add another participant to the conference call, repeat the previous steps. The maximum number of remote
parties is 5.
To have a private conversation with one of the participants, press the o
•
#. Scroll to the desired participant and press the s
versation, re-establish the conference by pressing the o
key.
To cancel the connection with some of the participants, press the o
•
GDP-04.i.ENG.MAN.User_Manual.15.B
Ptions
to answer the waiting call. Also you can select o
.
elect
selection key and then the h
menu in the normal operating mode.
for more than 3 seconds.
until "t
he Phone is starting
until the red light is activated and then
selection key. You may put the first call on hold if you want by
selection key.
olD
and J . The message c
Ptions oin calls
Ptions
selection key. Once you have finished the private con-
elect
selection key and then the J
Ptions
Ptions
- 7 -
..." message appears on
Ptions
or select the
onFerence
selection key and select P
oin calls
selection key and then select r
EN
and s
witch
again.
appears on
rivate
selection
elease