Illegal Access Detection Rom Setting; Cpu Operation Voltage Range Switching Setting; Jp1 Setting In Ie-703002-Mc; Jp3 And Jp4 Setting In Ie-703002-Mc - NEC V850/SC1 User Manual

2.3 Illegal Access Detection ROM Setting

If using the IE-703002-MC for an in-circuit emulator for the V850/SCx by connecting the IE-703089-MC-EM1, set
JP1 of the IE-703002-MC as follows.
JP1
Note
Open
Note When JP1 is set to open, keep the removed jumper contact attached to one
pin as shown in the drawing on the right.

2.4 CPU Operation Voltage Range Switching Setting

If using the IE-703002-MC for an in-circuit emulator for the V850/SCx by connecting the IE-703089-MC-EM1, set
JP3 and JP4 of the IE-703002-MC as follows.
JP3, JP4
JP3
(Shorted)
JP4
(Open)
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
Table 2-3. JP1 Setting in IE-703002-MC
Illegal access detection ROM (mounted on IE-703089-MC-EM1) for V850/SCx is
used.
Table 2-4. JP3 and JP4 Setting in IE-703002-MC
The operation voltage range of the IE-703002-MC is 3.0 to 5.5 V.
1
2
The power supply for PORTV
1
2
3
User's Manual U15776EJ1V0UM
Description
Description
is generated on the IE-703089-MC-EM1.
DD
JP1
Jumper
contact
25