7.1.7 Ad Hoc Network Setup
You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP
through the product.
How to set up using Ad hoc
compatible devices like a cell phone or PC. Other network services may be limited. Do you
want to change the network
Select OK, and press [
When the product finishes searching for your mobile device, input the generated
You can check the current network and Internet status.
(General), and press [
hoc. The message
"Ad hoc service supports a direct connection with Wi-Fi
connection?" is displayed.
]. The product searches for the mobile device.
into the device you want to connect and then connect to the network
If network does not operate normally, check the Network Name (SSID) and Security key
again. An incorrect Security key may cause a malfunction.
If a device is connected once, it is displayed in the Network Setting list. When you connect to
it again, you can find it in the list.
MagicInfo Lite Settings
], then press [