Small Parts List - Craftsman 315.272350 Owner's Manual

254 mm (10 in.) stationary table saw
Table of Contents

Advertisement

Check all loose parts from the box with the list and figures below and on the previous pages. Small items such
as fasteners and end caps are shown in figure 2 c. Follow the instructions in the Assembly section to assemble
your new saw.
O. Hardware for Rail, Front ..................................... 1
square head bolt (5/16-18 x 1 in.) ...................... 6
flat washer (5/16 in.) ........................................... 6
hex nut (5/16-18) ................................................ 6
end cap for front rail ........................................... 2
screw (#8-32 x 1/2 in.) ........................................ 2
P. Hardware For Rail, Rear .................................... 1
square head bolt (5/16-18 x 1 in.) ..................... 6
flat washer (5/16 in.) .......................................... 6
hex nut (5/16-18) ................................................ 6
end cap for rear rail ........................................... 2
screw (#8-32 x 1/2 in.) ....................................... 2
®
TABLE SAW 315.272350

SMALL PARTS LIST

Y. Hardware for Blade Guard Bracket and Blade Guard
Assembly
Blade Guard Bracket .......................................... 1
hex cap screw (5/16-18 x 1/2 in.) ....................... 2
lock washer (5/16 in.) ......................................... 2
Blade Guard Assembly ....................................... 1
socket head cap screw (1/4-20 x 3/8 in.) ........... 3
flat washer (1/4 in.) ............................................. 3
M. Hardware for Mounting Switch Assembly
square nut (1/4-20) ............................................. 2
screw (1/4-20 x 3/8 in.) ....................................... 2
screw (#10-24 x 3/8 in.) ...................................... 2
cord clip .............................................................. 2
Note: Cord clip and screw mount to the either side of
saw cabinet and are used to secure motor
cord, depending upon operator preference of
switch assembly.
12
Fig. 2 c

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents