Listening To The Radio - Pioneer VSX-922-K Operating Instructions Manual

Av receiver
Hide thumbs Also See for VSX-922-K:
Table of Contents

Advertisement

05
About playable file formats
The USB function of this receiver supports the following file formats. Note that some file formats are not available
for playback although they are listed as playable file formats.
Music files
Category
Extension
MP3
.mp3
MPEG-1 Audio Layer-3
<a>
WAV
.wav
LPCM
WMA2/7/8/9
WMA
.wma
<b>
.m4a <c>
MPEG-4 AAC LC
.aac
AAC
MPEG-4 HE AAC
.3gp
(aacPlus v1/2)
.3g2
FLAC
.flac
FLAC
<d>
a "MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia."
b Files encoded using Windows Media Codec 9 may be playable but some parts of the specification are not supported; specifi-
cally, Pro, Lossless, Voice.
c Apple lossless encoding is not supported.
d Uncompressed FLAC files are not supported. Pioneer does not guarantee playback.
Photo files
Category
Extension
JPEG
.jpg
Stream
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
Quantization bitrate
16 bit
Channel
2 ch
Bitrate
8 kbps to 320 kbps
VBR/CBR
Supported/Supported
32 kHz, 44.1 kHz, 48 kHz,
Sampling frequency
88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
Quantization bitrate
16 bit, 24 bit
Channel
2 ch
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
Quantization bitrate
16 bit
Channel
2 ch
Bitrate
5 kbps to 320 kbps
VBR/CBR
Supported/Supported
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
Quantization bitrate
16 bit
Channel
2 ch
Bitrate
16 kbps to 320 kbps
VBR/CBR
Supported/Supported
32 kHz, 44.1 kHz, 48 kHz,
Sampling frequency
88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
Quantization bitrate
16 bit, 24 bit
Channel
2 ch
Format
Meeting the following conditions:
! Baseline JPEG format
! Y:Cb:Cr – 4:2:2

Listening to the radio

The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a
station below. Once you are tuned to a station you can memorize the frequency for recall later-see
presets
on
page 40
for more on how to do this.
1
Press TUNER to select the tuner.
2
Use BAND to change the band (FM or AM), if necessary.
3
Tune to a station.
There are three ways to do this:
! Automatic tuning – To search for stations in the currently selected band, press and hold TUNE +/– for about
a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to
search for other stations.
! Manual tuning – To change the frequency one step at a time, press TUNE +/–.
! High speed tuning – Press and hold TUNE +/– for high speed tuning. Release the button at the frequency
you want.
Improving FM sound
If the TUNED or STEREO indicator doesn't light when tuning to an FM station because the signal is weak, press
MPX to switch the receiver into mono reception mode. This should improve the sound quality and allow you to
enjoy the broadcast.
Tuning directly to a station
1
Press TUNER to select the tuner.
2
Use BAND to change the band (FM or AM), if necessary.
3
Press D.ACCESS (Direct Access).
4
Use the number buttons to enter the frequency of the radio station.
For example, to tune to 106.00 (FM), press 1, 0, 6, 0, 0.
If you make a mistake halfway through, press D.ACCESS twice to cancel the frequency and start over.
Saving station presets
If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy
recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. This
receiver can memorize up to 63 stations, stored in seven banks, or classes (A to G) of 9 stations each.
1
Tune to a station you want to memorize.
See

Listening to the radio

on
page 40
for more on this.
2
Press TOOLS (TUNER EDIT).
The display shows PRESET MEMORY, then a blinking memory class.
3
Press CLASS to select one of the seven classes, then press PRESET +/– to select the station
preset you want.
You can also use the number buttons to select a station preset.
4
Press ENTER.
After pressing ENTER, the preset class and number stop blinking and the receiver stores the station.
40
Basic playback
 
Saving station
 
 
 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-1122-k

Table of Contents