Download  Print this page

Advertisement

connected to the wall outlet, even if the
unit itself has been turned off.
IMPORTANT
The nameplate is located on the
bottom.
WARNING
Batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to
the manufacturer's instructions.
This symbol is intended to
alert the user to the presence
of uninsulated "dangerous
voltage" within the product's
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
20
WARNING: THIS WARNING IS
APPLICABLE FOR USA ONLY.
If used in USA, use the UL LISTED
power cord specified below.
DO NOT USE ANY OTHER POWER
CORD.
Plug Cap Parallel blade with ground
pin
(NEMA 5-15P Configuration)
Cord
Type SJT, three 16 or 18
AWG wires
Length
Minimum 1.5m (4 ft.11in.),
Less than 2.5 m (8 ft.3 in.)
Rating
Minimum 10A, 125V
Using this unit at a voltage other than
120V may require the use of a different
line cord or attachment plug, or both. To
reduce the risk of fire or electric shock,
refer servicing to qualified service
personnel.
WARNING: THIS WARNING IS
APPLICABLE FOR OTHER
COUNTRIES.
1. Use the approved Power Cord (3-
core mains lead) / Appliance
Connector / Plug with earthing-
contacts that conforms to the safety
regulations of each country if
applicable.
2. Use the Power Cord (3-core mains
lead) / Appliance Connector / Plug
conforming to the proper ratings
(Voltage, Ampere).
If you have questions on the use of the
above Power Cord / Appliance
Connector / Plug, please consult a
qualified service personnel.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: