On-Screen Menus; How To Operate - NEC LT20 User Manual

On-Screen Menus

The Projector has multilingual On-Screen menus that allow you
to make image adjustments and change a variety of settings. The
projector will automatically detect the source.

How to operate

1.
To open the OSM menu, press "Menu" on the Remote Control
or Control Panel.
2.
When OSM is displayed, use
main menu. While making a selection on a particular page, press
"Enter" key to enter sub menu.
3.
Use keys to select the desired item and adjust the
settings by
4.
Select the next item to be adjusted in the sub menu and adjust as
described above.
5.
Press "Exit" to confirm, and the screen will return to the main
menu.
6.
To exit, press "Exit" again. The OSM menu will close and the
projector will automatically save the new settings.
Main Menu
Sub Menu
User Controls
keys to select any item in the
key.
Setting
17
... English