Adjusting The Projected Image; Adjusting The Projector Image Height - NEC LT20 User Manual

Adjusting the Projected Image

Adjusting the Projector Image Height

The projector is equipped with an elevator foot for adjusting
the image height.
To raise the image:
1. Press the elevator button
2. Raise the image to the desired height angle
the button to lock the elevator foot into position.
3. Use to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator
foot into position.
3. Use to fine-tune the display angle.
1
Elevator Button
Installation
.
2
Elevator Foot
Tilt Adjusting Wheel
, then release
3
13
... English