Computer Source Menu; Video Source Menu - Dell 3400MP Owner's Manual

Computer Source Menu

NOTE:
This menu is only available connected to a computer.
NOTE:
Adjust the Frequency first and then the Tracking.
H . P —Press
OR OSITION
left and to adjust the horizontal position of the image to the right.
V . P —Press
ER OSITION
to adjust the vertical position of the image up.

Video Source Menu

NOTE:
This menu is only available with S-video, Video (composite) signal
connected.
22 Using Your Projector
F
REQUENCY
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
T
RACKING
display signal with the graphic card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
to adjust the horizontal position of the image to the
to adjust the vertical position of the image down and
S
ATURATION
and white to fully saturated color. Press
decrease the amount of color in the image and
to increase the amount of color in the
image.
S
HARPNESS
sharpness and
T —Press
INT
green in the image and
amount of red in the image.
—Change the display data clock
—Synchronize the phase of the
—Adjust a video source from black
to decrease the
—Press
to increase the sharpness.
to increase the amount of
to
to increase the