Dell 3400MP Owner's Manual page 19

C S —Manually adjust red, green, and blue color.
OLOR ETTING
K —Adjust image distortion caused by tilting the projector (
EYSTONE
A K —Auto adjust the image distortion by tilting the projector.
UTO EYSTONE
A R —Select an aspect ratio to adjust how the image appears.
SPECT ATIO
• 1:1 — The input source displays without scaling.
Use 1:1 aspect ratio if you are using one of the following:
– VGA cable and the computer has a resolution less than XGA (1024 x 768)
– Component cable (576p/480i/480p)
– S-Video cable
– Composite cable
• 16:9 — The input source scales to fit the width of the screen.
• 4:3 — The input source scales to fit the screen.
Use 16:9 or 4:3 if you are using one of the following:
– Computer resolution greater than XGA
– Component cable (1080i or 720p)
V M —Select a mode to optimize the display image based on how the
IDEO ODE
projector is being used: Movie, Game, PC, sRGB (provides more accurate color
representation), and User (set your preferred settings). If you adjust the settings
for White Intensity or Degamma, the projector automatically switches to User.
W I —Setting 0 to maximize the color reproduction and 10 to
HITE NTENSITY
maximize the brightness.
D —Adjust between 1 and 4 to change the color performance of the display.
EGAMMA
B —Use
RIGHTNESS
brightness of the image.
C —Use
ONTRAST
degree of difference between the brightest
and darkest parts of the picture. Adjusting
the contrast changes the amount of black and
white in the image.
C T .—Adjust the color temperature.
OLOR EMP
The higher the temperature, the screen
appears more blue; the lower the
temperature, the screen appears redder. User
mode activates the values in the "color
setting" menu.
Using Your Projector
and to
adjust the
and
to control the
±16 degrees).
19