Terminal Panel - NEC DT100 User Manual

■ Terminal panel

Test (maintenance)
PC video input
PC video output
PC audio input
Video Source audio inputs
Video Source video input
S-video video input
Audio output
Test (maintenance) input/output
Video Source
video input
Video Source
S-video
video input
V
S-VIDEO
VIDEO-IN
TEST PC-OUT
PC video
input/output output
PC analog RGB input terminal
Connector for outputting input video images as-is. Video images are
output when the lamp is [ON] or during standby.
PC audio input terminal (stereo).
Video Source audio input terminal (stereo).
Video Source (NTSC, PAL or SECAM) input terminal
S-video (Y/C separation) input terminal
DT100 stereo audio output terminal
This stereo mini-jack outputs the currently selected audio source
(PC or video source). Audio is output from PC during standby.
Audio is output from PC when OHP is selected.
Input/output terminal used only for maintenance and test exclusively.
Service only.
Audio output
audio inputs
L R OUT
PC-AUDIO
PC-IN
PC video
input
Part Names and Functions
PC audio
input
IN
E-11