Table of Contents
Advertisement
Setting the color temperature
Use this procedure to set color tone produced by the plasma
display.
Example: Setting "1"
Press the PROCEED button on the remote control unit to
display the MAIN MENU on the screen, then...
1. Use the L and M buttons to select "PICTURE", then
press the PROCEED button.
The "PICTURE" screen appears.
2. Use the L and M buttons to select "COLOR TEMP.".
P I C T U R E
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
SEL.
ADJ.
3. Use the
and
buttons to select "1".
The mode switches as follows when the
buttons are pressed:
1
2
3
PRO
* See page 22 to set "PRO".
COLOR TEMP.
* If neither the
or
button is pressed within 5 seconds,
the current selection is set and the previous screen reappears.
R
G
:
MEMORY
:
2
:
OFF
EXIT
RETURN
and
:
1
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
Setting the color temperature
1 ...................... High (bluer)
2 ......................... Middle (Standard)
3 ...................... Low (redder)
Restoring the factory default settings
Select "RESET" under the function menu. Note that this
also restores other settings to the factory defaults.
21
Advertisement
Table of Contents
