Two Vcrs For Tape Editing - Sony TRINITRON KV-27HS420 Service Manual

Two VCRs for Tape
Editing
Using
S VIDEO jacks?
See page 15.
Playback VCR
A/V cable
Notes on Using This Connection
To Do This ...
View (monitor) what is being
recorded
Set up the TV remote control
to operate the VCR(s)
Activate the TV remote
control to operate the VCR(s)
Control VCR functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
20
Connecting two VCRs lets you record from one VCR to the other. By
connecting them as shown below, you can view (monitor) what is
being recorded.
To connect two VCRs for tape editing
1
Use an A/V cable to connect the playback VCR's A/V output
jacks to the TV's A/V input jacks.
2
Use an A/V cable to connect the recording VCR's A/V input
jacks to the TV's MONITOR OUT jacks.
TV
Do This ...
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration above).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 37-38.
Press VCR/DVD FUNCTION.
See "Operating a VCR" on page 43.
See the instructions for setting up Video Labels on pages 58-59.
Recording VCR
A/V cable
color-coded to connectors.
Cables are often
Connect red to red,
white to white, etc.