Setting The Equalizer (Eq7) - Sony cdx-m730 Operating Instruction

Sound
• HPF (High pass filter)
– to select the cut-off frequency to "78 Hz,"
"125 Hz," or "off."
• LPF (Low pass filter)
– to select the cut-off frequency to "78 Hz,"
"125 Hz," or "off."
• Loud (Loudness)
– to enjoy bass and treble even at low volumes.
The bass and treble will be reinforced.
Play Mode
• Local on/off (Local seek mode) (page 14)
– Select "on" to only tune into stations with
stronger signals.
• Mono on/off (Monaural mode) (page 14)
– Select "on" to hear FM stereo broadcast in
monaural. Select "off" to return to normal
mode.
• REG on/off (Regional) (page 17)
1
Press (MENU).
To set A.Scrl, press (MENU) during CD/MD
playback.
To change the items of Play Mode, press
(MENU) during radio reception.
2
Press M or m repeatedly until the
desired item appears.
3
Press , to select the desired setting
(Example: "on" or "off").
4
Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing M
or m for 2 seconds.

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music
types (Xplod, Vocal, Club, Jazz, New Age, Rock,
Custom), and off (equalizer off).
You can store and adjust the equalizer settings
for frequency and level.
You can store the EQ7 setting for each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(radio, CD, or MD).
2
Press (EQ7) repeatedly until the
desired equalizer curve appears.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "off."
After 3 seconds, the display returns to the
normal playback mode.
continue to next page t
23