Installing A Wall-Mount Kit Or Desktop Stand - Samsung S22F35 series User Manual

Table of Contents

Advertisement

Installing a Wall-mount Kit or Desktop Stand

― Power the product off and remove the power cable from the power socket.
1
A
3
B
Attach the wall-mount kit or desktop stand here
A
B
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
2
4
Notes
‒ Using a screw longer than the standard length can damage the internal components of the
product.
‒ The length of screws required for a wall mount that does not comply with the VESA standards
may vary depending on the specifications.
‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a
wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on
your own.
‒ To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10 cm
or farther away from the wall.
‒ Be sure to use a wall-mount kit that complies with the standards.
‒ To install the monitor using a wall mount, disconnect the stand base from the monitor.
Model name
VESA screw hole specs (A * B)
in millimeters
SF35* SERIES
75.0 x 75.0 (3.0 x 3.0)
― Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
― The dimensions of this model required by VESA are 75.0 x 75.0 mm. Please purchase the wall-mount tailored
to the dimensions of 75.0 x 75.0 mm, and its external dimension required by VESA shall be less than 94.0
mm.
― Some wall-mounts used for the dimensions of both 100.0 x 100.0 mm and 75.0 x 75.0 mm may not be
mountable.
Unit: mm (inches)
Standard Screw
Quantity
M4
4
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S24f35 seriesS27f35 series

Table of Contents