Specifications - NEC XM37 User Manual

Specifications

Picture tube
RGB Input Terminals
RGB Output Terminals
THROUGH OUT
Video Input Terminals
VIDEO 1/2
S-VIDEO (Video 1/2)
Video Output Terminals
THROUGH OUT (Video 1, 2)
THROUGH OUT (S-VIDEO 1, 2)
Audio Input Terminals
VIDEO 1, 2 / RGB
Audio Output Terminals
THROUGH OUT
External Control
(IN/THROUGH OUT)
SOUND Output
Internal
External
Speaker
Display Colors
Synchronization Range
35 inch Visual size; 37 inch CRT size (Diagonal), Type M89LAK113K
108 degree deflection
Stripe trio pitch Ph 0.85 mm at center, Ph 1.05 mm at corner/Pv 0.87 mm
Invar mask, Medium-short persistence phosphor
Anti-static electricity coating
Optical filter coating
Dynamic focus
RGB 1 : D-SUB 15pin/mini D-SUB 15pin RGB 2: (R, G, B, H/CS and V)
: Video : Analog 0.7Vp-p/75 Ohms (Positive)
: Sync. : Separate Sync. TTL level, 0.7 - 4.0Vp-p/75 Ohms..........RGB 2 only
Horizontal Sync.
Vertical Sync.
: Composite Sync. TTL Level
: Composite Sync. On Green Video 0.3Vp-p (Negative)
RGB 1 : D-SUB 15 pin/mini D-SUB 15 pin
1.0Vp-p, 75 Ohms unbalanced (BNC-Jack), Composite video signal, Sync-negative.
Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative.
Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
Left (Mono) : 0.5 Vrms, high impedance (Pin-Jack)
Right : 0.5Vrms, high impedance (Pin-Jack)
Left : 0.5 + 0.1 Vrms, less than 22 K Ohms (Pin-Jack)
Right : 0.5 + 0.1 Vrms, less than 22 K Ohms (Pin-Jack)
mini D-SUB 15pin (IN/THROUGH OUT)
2.5W+2.5W (THD 10%) at 16 Ohm
5W+5W (THD10%) at 8 Ohm
Oval type 9 X 5.5 cm
16 Ohm, 2pcs.
Analog Input: Unlimited colors
Horizontal: XP37Plus; 15.7/31 KHz to 95 KH XM37Plus; 15.7/31 KHz to 65 KHz (Automatically)
Vertical:40 Hz to 120 Hz (Automatically)
(Positive/Negative)
(Positive/Negative)
(Positive/Negative)
RGB 2 : BNC (R, G, B, H/CS and V)
47
48
11