Features And Functions; Front Panel - Mitsubishi Electric CP-D90DW Operation Manual

FEATURES AND FUNCTIONS

1 2 3
6
ALARM INDICATOR ( )
1
This indicator illuminates or blinks when a paper jam
occurs, the door is open, or the paper strip bin is
removed. See page 17.
PAPER RIBBON INDICATOR (
2
When an error concerning the ink ribbon or print paper
occurs, this indicator illuminates or blinks.
17.
POWER INDICATOR ( )
3
When the power is turned on, the indicator illuminates.
It normally illuminates green, however, blinks or
illuminates orange depending on the printer status.
page 17.
PRINT OUTLET
4
The printed paper comes out here.
OPEN BUTTON ( )
5
Press to release the printing unit out.
PAPER STRIP BIN
6
Holds the paper strips generated by margin cut. Empty
the bin frequently to prevent jamming the strips at the
print outlet.
• Remove the bin before opening the door. If
the door is opened with this bin attached, the
printer or this bin may be damaged. Do not
remove the bin during printing. It may cause
a malfunction.
VENTILATION INLET
7
This inlet is for cooling the inside of the printer.
PRINTING UNIT
8
Open to load print paper or ink ribbon. Press the
OPEN button to release the printing unit.
DOOR
9
Open the door to mount print paper.

FRONT PANEL

4 5
7
)
See page
See
NOTE
8
9
OPENING THE DOOR
Pull out the printing unit by pressing the OPEN button
and then pull the knob to open the door.
OPEN button
PAPER STRIP BIN
Hook and pull up the paper strip bin to attach it firmly.
Hold and pull the handle on the lower part of paper strip
bin to remove.
PAPER TRAY
Engage the upper hooks of
the tray on the protrusions on
the top of the paper strip bin
(1). Then, secure the tray by
engaging the lower hooks in
the holes on both sides of the
bin (2).
NOTE
• Remove the paper tray when printing in 13x18
(5x7"), 15x20 (6x8"), or 15x23 (6x9") size.
Knob
1
2
7