Sony SDM-HS75P Operating Instructions Manual page 42

Symptom
Picture is fuzzy
Picture is ghosting
Picture is not centered or sized
properly (analog RGB signal only)
Picture is too small
Picture is dark
Wavy or elliptical pattern (moire)
is visible
Color is not uniform
White does not look white
Monitor buttons do not operate
( appears on the screen)
The monitor turns off after a while
Resolution displayed on the menu
screen is incorrect
Displaying this monitor's information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
MENU
Example
INFORMATION
MODEL : SDM-HS75P
SER . NO : 1234567
MANUFACTURED : 2004-52
Check these items
• Adjust the brightness and contrast (page 11).
• Adjust the pitch and phase (analog RGB signal only) (page 13).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280 × 1024) on your computer.
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Adjust the pitch and phase (page 13).
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to
the edges.
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280 × 1024) on your computer.
• Adjust the brightness (page 11).
• Adjust the backlight (page 10).
• It takes a few minutes for the display to become bright after turning on the monitor.
• When the MODE menu is set to AUTO, the display brightness may become dark in low
ambient light (pages 10, 16).
• Adjust the pitch and phase (analog RGB signal only) (page 13).
• Adjust the pitch and phase (analog RGB signal only) (page 13).
• Adjust the color temperature (page 11).
• If "MENU LOCK" is set to "ON", set it to "OFF" (page 14).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the computer's power saving setting to off.
• Depending on the graphics board setting, the resolution displayed on the menu screen
may not coincide with the one set on the computer.
Although the safety standard registered model name of this unit is
SDM-HS75P/, the name of SDM-HS75P is used on sale and in
this operating instructions.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HS75P
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Model name
Serial number
Week and year
of manufacture
GB
19