Hitachi C 14DMR Safety Instructions And Instruction Manual page 28

English
1. Detaching light bulb
(1) Remove the convex part of the light cover
from the concave part of the housing, and
then pull out the light cover in the arrow-
marked direction as shown in Fig. 21.
(2) Push the back of the socket, and remove
the socket and the light bulb together
from the housing (Fig. 22).
(3) Remove the light bulb from the socket
(Fig. 23).
2. Attaching light bulb
Take procedures here that are contrary to
the detaching procedures.
NOTE:
When attaching the light bulb to the
socket, insert the light bulb until it lightly
bumps against the socket.
When attaching the socket to the hous-
ing, align the socket with the hole of
housing while watching the back of the
socket shown in Fig. 23, and insert the
socket until it lightly bumps against the
housing.
28
Light cover
Convex
Concave
Housing
Fig. 21 〈Side View〉
Back of the socket
Housing
Fig. 22
Light bulb
Socket
Housing
Fig. 23 〈Top View〉