NEC AccuSync 500 User Manual page 11

Controls
Side Jacks
Headphone Jack
Microphone Jack
Rear Panel Jacks
Audio In
AUDIO MIC.
Mic Out
IN OUT
Microphone Operation
Using this jack reduces the length of cable needed to reach the PC's sound card. In order to use
the MIC jack, use a cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the
MIC input jack of your sound card (if available).
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the
connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC
sound card has only Speaker Out, reduce the PC volume. .
NOTE: If the Audio Out of the PC sound card supports both Speaker Out and Line Out,
convert to Line Out using the card jumper of the program (Refer to the Sound Card
Manual).
AS500700700M900FINAL2.p65
–continued (AccuSync 700M)
Automatically mutes the speaker volume
when the headphones are plugged in.
Can be used instead of the built-in micro-
phone.
Connects to the *LINE OUT jack of the
-Sky Blue
PC sound card.
- Pink Connects to the microphone jack of the
PC sound card.
9
9 10/24/03, 10:13 AM