Advanced Option - NEC MultiSync LCD4615 User Manual

ADVANCED OPTION

DVI MODE
INPUT RGB1 only
SCAN CONVERSION
INPUT DVD/HD, VIDEO(S), VIDEO only
PROGRESSIVE
INTERLACE
COLOR SYSTEM
INPUT VIDEO(S), VIDEO only
SCAN MODE
INPUT DVD/HD, VIDEO(S), VIDEO only
OVER SCAN
UNDER SCAN
BLACK LEVEL
EXPANSION
INPUT VIDEO(S), VIDEO only
ADVANCED OPTION
RESET
FACTORY RESET
Selects the kind of DVI-D equipment which is connected RGB1.
Selects "DVI-PC" when PC or other computer equipment is connected.
Selects "DVI-HD" when DVD player, which has DVI-D output, is connected.
Selects IP (Interlace to Progressive) converter function.
Enables the IP function, to convert interlace signal to progressive. Normally use this.
Disables the IP function.
NOTE: This mode is better suited for motion pictures, but it is in danger of image retention.
Selects color system depend on your video format of the input signal.
(AUTO/PAL/NTSC/PAL60/4.43NTSC/SECAM)
AUTO: Selects color system setting automatically base on input signal.
Changes the display area of the image.
Set to display area about 95%
Set to display area about 100%
Selects a level of black expansion.
In case of go under the black cut-off level, please adjust the "Black level" in moderation on OSD menu.
Resets the all settings within the ADVANCED OPTION menu back to factory setting.
Selecting "YES" allows you to reset PICTURE, ADJUST, AUDIO, PIP, OSD, MULTI DISPLAY,
DISPLAY PROTECTION and ADVANCED OPTION will be back to factory settings (except LANGUAGE,
DATE AND TIME and SCHEDULE).
Select "YES" and press "SET" button to restore the factory preset data.
Press "EXIT" button to cancel and return the previous menu.
English-24