Table of Contents
Advertisement
Cleaning and care
Cleaning the water inlet filter
The washing machine has a filter to
protect the water inlet valve. The
accessible filter in the union at the open
end of the inlet hose should be checked
every six months or so, or more often if
there are frequent interruptions to the
water supply.
70
First turn off the stopcock.
Unscrew the inlet hose from the
stopcock.
Remove the rubber seal 1 from the
recess.
Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
Clean the plastic filter.
Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If water
drips out, tighten the connection.
The filter must be put back in place
after cleaning.
Hide quick links:
Advertisement
Table of Contents
