Operation - Sharp FP-FM40E Operation Manual

OPERATION

CLEAN AIR
START
HAZE
The unit operates at HIGH fan speed for 60 minutes and then alternates between Low and High
level for 20 minutes each.
START
FAN SPEED
AUTO SLEEP
OM_FP-FM40E_40L_EN.indd Sec1:8 OM_FP-FM40E_40L_EN.indd Sec1:8
STOP
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
NOTE
• CLEAN ION SHOWER mode is available even while using
mosquito catcher mode.
• If Plasmacluster Ion is OFF, Plasmacluster Ion will not be
released.
• It is possible to switch this mode to another while operating.
However, the HAZE mode will not function after switching
mode.
NOTE
AUTO
• The fan speed is automatically switched depending on the
amount of impurities in the air. The sensors detect impurities
for efficient air purifi cation.
MED MAX
SLEEP
• The unit will operate very quietly, and the fan speed
is automatically switched depending on the amount of
impurities in the air.
It will darken the brightness of the following lamp.
CATCH Lamp / UV Light Lamp / GLUE SHEET Lamp /
UV Light of the backside.
DUST/PLASMACLUSTER SIGN go off automatically.
Even though the indicator is off, Plasmacluster Ion is
dispersed into air unless Plasmacluster Ion is turned off by 3
sec press of
• Select the desired fan speed.
• Unless the power cord has been
unplugged, the operation starts in the
previous mode it was operated in.
.
E-8
7/24/2558 BE 9:02 AM 7/24/2558 BE 9:02 AM