Basic System Connection - Sony DXC-H10 Operating Instructions Manual

Basic System Connection

To supply power to the camera, use the CMA-H10 camera
adaptor (not supplied).
To connect the camera to the camera adaptor, you need only
one CCZ-A cable. The cable supplies power to the camera
and transmits video signals to the camera adaptor. The cable
can be extended up to 100 m.
With the RM-C950 remote control unit (not supplied)
connected to the camera adaptor, the camera and the lens
can be remotely controlled by the remote control unit.
Note on connections
Be sure to turn off power supply for all equipment before
making any connections.
Chapter 3 Installation and Connections
DXC-H10.3-862-128-01 (3) J/E/F
41
(EN)