Sony XDCAM PMW-500 Operation Manual page 117

OPERATION
Menu items Sub-item
VF Setting Color
Makes settings
related to the
Mode
viewfinder screen.
Peaking Type
Peaking
Frequency
Peaking Color
VF Detail Level
Color Peaking
Level
Marker Setting
Makes settings
related to marker
display in the
viewfinder screen.
Center Marker
Center H Position
Center V Position
Safety Zone
Safety Area
Aspect Marker
Aspect Select
Settings
b)
–99 to ±0 to +99
b)
Color/B&W
b)
Normal/Color/Both
Normal/High
b)
b)
White/Red/Yellow/Blue
c)
–99 to ±0 to +99
Low/Mid/High
b)
On/Off
1/2/3/4/Off
–40 to 0 to 40
–40 to 0 to 40
On/Off
80%/90%/92.5%/95%
Line/Mask/Off
15:9/14:9/13:9/4:3/
1.66:1/1.85:1/2.35:1/2.4:1
Description
Adjusts the density of the colors
displayed in the viewfinder screen.
Selects the display mode of the
viewfinder.
Color: Color
B&W: Monochrome
Selects the peaking type.
Normal: Normal peaking
Color: Color peaking
Both: Both
Selects Normal or High as the peaking
frequency.
When the Peaking Type setting is Color,
selects the peaking color from among
White, Red, Yellow, and Blue.
Adjusts the detail level (set on the
camcorder) of the viewfinder
When the Peaking Type setting is Both,
selects the color peaking level from
among Low, Mid, and High.
Turns all markers on or off.
Note
When Marker is assigned to the ASSIGN.
2 switch, this setting is disabled.
When the center marker is displayed,
selects the type. Select Off if you do not
want to display the marker.
Note
When three of Safety Zone, User Box,
Guide Frame, and 100% Marker are set to
[On], this setting cannot be turned on.
Specifies the horizontal position of the
center marker.
Specifies the vertical position of the
center marker.
Turns the safety zone display on or off.
Note
When three of Center Marker, User Box,
Guide Frame, and 100% Marker are set to
[On], this setting cannot be turned on.
Selects the safety zone range.
When an aspect marker is to be
displayed, selects the display method.
Select Off if you do not want to display
the marker.
Line: Show as white lines.
Mask: Display by lowering the video
signal level of areas outside the
marker range.
Selects the aspect ratio of the marker.
Menu List 117