Input Selector - Yamaha A-S2000 Owner's Manual

Hide thumbs Also See for A-S2000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
TREBLE
BALANCE
-
+
L
7
8

0 INPUT selector

Selects the input source you want to listen to.
The audio signals of the selected input source are also
output at the REC jacks.
Notes
• Switch to the CD BAL position to select the CD player
connected to the CD BAL jacks (balanced XLR jacks).
• Switch to the CD position to select the CD player connected to
the CD jacks (unbalanced RCA jacks).
• Switch to the MAIN DIRECT position to select the component
connected to the MAIN IN jacks. When MAIN DIRECT is
selected as the input source, no signals are output at the PRE
OUT, REC, and PHONES jacks.
INPUT
CD BAL
LINE 1
CD
LINE 2
MAIN DIRECT
R
PHONO
AUDIO MUTE
MM
MC
9
0
VOLUME
TUNER
PHONO
A
B
A AUDIO MUTE
Press downward to reduce the current volume level by
approximately 20 dB. Press again to restore the audio
output to the previous volume level.
y
• The AUDIO MUTE indicator lights up while the mute function
is on.
• You can also rotate VOLUME on the front panel or press
VOL +/– on the remote control to resume the audio output.
B VOLUME
Controls the volume level. This does not affect the REC
level.
Note
The VOLUME control does not affect when you select MAIN
DIRECT as the input source. Adjust the volume level using the
volume control on the external amplifier connected to the MAIN
DIRECT jacks.
9
En

Advertisement

Table of Contents
loading

Table of Contents