Maintenance And Care; Troubleshooting - Kärcher WD 3.2xx User Manual

Wet vacuum cleaning

Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or di-
rectly to the handle.
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance imme-
diately and empty the container.
Working with electrical power tools

Adapt the adapter to the connection diam-
eter of the electric tool using a knife if nec-
essary.

Illustration
Connect the adapter to the handle of the
suction hose and connect it to the electric
tool connection.
Connect the mains plug of the electric
power tool to the vacuum cleaner.

Illustration
Switch the vacuum cleaner to Position II
and start working.
Note: The suction turbine starts with a de-
lay of 0.5 seconds after the electric tool
has been switched on. After the electric
tool has been switched off, the suction tur-
bine will continue to run for approx. 5 sec-
onds to suck in the remaining dirt from the
suction hose.
Blowing function
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from a
gravel bed.

Illustration
Connect the suction hose to the blower
connection, this will activate the blower
function.
Interrupting operation

Turn off the appliance.

Illustration
Hook the floor nozzle into the parking po-
sition.
Downloaded From Vacuum-Manual.com Manuals
Finish operation

Turn off the appliance and disconnect the
mains plug.
Empty the container
 Illustration
Remove the appliance head and empty
the reservoir.
Storing the appliance

Illustration
Stow away the mains cable and accesso-
ry at the machine. Store the appliance in a
dry room.

Maintenance and care

Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the
authorized customer service.
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in wa-
ter.

Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.

If required, rinse the container and acces-
sories with water properly and dry them
before reuse.

Illustration
Only clean the cartridge filter under run-
ning water; do not wipe or brush. Let it dry
completely prior to installation.

Troubleshooting

Decreasing cleaning power
If the cleaning power of the appliance deterio-
rates please check the following:

Accessories, suction hose or suction
tubes are clogged, please remove the ob-
struction using a stick.

Filter bag is full, install new filter bag.
(see description / illustration
– 4
EN
)
13