4.6
Camera Control
4.6.1
Add (pair) a camera
M
1. Press the
button and the menu bar will pop up.
2. Press the
LEFT button or
/
/
the
del
add
view scan
3. Press the
OK button to confirm.
4.
/
/
cam
cam
cam
*1
2
3
to select the desired CAM, and press the OK button to start searching for a
camera unit. The green audio level LED will flash rapidly while searching.
5. Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and the picture from the camera
appears.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2
View a camera
M
1. Press the
button and the menu bar will pop up.
2. Press the
LEFT button or
/
/
the
del
add
view scan
3. Press the
OK button to confirm.
4.
/
/
cam
cam
cam
*1
2
3
to select the desired camera, and press the OK button to view the picture
from that camera.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select
4.6.3
View multi-cameras on screen (Picture in Picture)
This function is only available when you have more than 1 Baby Unit (Camera).
When the Picture in Picture function is On, you can view multiple cameras on
the screen.
Parent Unit Menu Options
/
menu will pop up.
UP button or
DOWN button to select
/
will pop up, press the
cam
4
/
menu pops up.
UP button or
DOWN button to select
/
will pop up, press the
cam
4
RIGHT button until
UP button or
RIGHT button until
UP button or
,
,
,
cam
cam
cam
cam
*1
2
3
4
is highlighted, and
, and press the
add
DOWN button
is highlighted and
, and press the
view
DOWN button
,
.
scan
17