Using The Baby Monitor; Setting Up; Pan And Tilt; Night Vision Mode - Motorola MBP853CONNECT User Manual

3. Using the Baby Monitor

3.1

Setting up

• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's head by rotating the camera up, down, left
and right until you are satisfied with the image in the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2

Pan and Tilt

The camera can be remotely controlled from the Parent Unit.
1. Press the UP button or
2. Press the LEFT button or
3.3

Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the
dark. When the built-in photo sensor on the top of the unit detects a low level of
ambient light, the LEDs will automatically activate and the screen on the Parent Unit
will display in black and white. The
3.4

Talk Mode

Press and hold the
Baby Unit's loudspeaker. The
3.5

Video ON/OFF

V
Press VIDEO ON/OFF key to turn the LCD display on or off, whilst still
leaving the audio monitor on.
3.6 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
Using the Baby Monitor
DOWN button to tilt up or down.
T
TALK button on the Parent Unit to talk to your baby through the
T
icon will be displayed at the top of the LCD screen.
RIGHT button to pan left or right.
icon will be displayed at the top of the screen.
15