NEC MultiSync LCD1560NX User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Monitor
  5. LCD1560NX - MultiSync - 15" LCD Monitor
  6. User manual
NEC MultiSync LCD1560NX User Manual

NEC MultiSync LCD1560NX User Manual

Nec disply solutions user's manual lcd monitor lcd1560nx
Hide thumbs Also See for MultiSync LCD1560NX:
Table of Contents

Advertisement

Quick Links

See also: User Manual
MultiSync LCD1560NX
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for NEC MultiSync LCD1560NX

Summary of Contents for NEC MultiSync LCD1560NX

  • Page 1 MultiSync LCD1560NX User’s Manual...

  • Page 2: Declaration Of The Manufacturer

    Therefore, it should be read carefully in order to avoid any problems. Caution: When operating the MultiSync LCD1560NX with a 220-240V AC power source in Europe, use the power cord provided with the monitor. In the UK, a BS approved power cord with a moulded plug has a Black (five Amps) fuse installed for use with this equipment.

  • Page 3: For The Customer To Use In U.s.a. Or Canada

    Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de sûrele Canadiens selon CAN/CSA C22.2 No. 950. FCC Information Use the attached specified cables with the MultiSync LCD1560NX colour monitor so as not to interfere with radio and television reception.

  • Page 4: Quick Start

    Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1560NX monitor with tilt base • Power Cord • Video Signal Cable • User’s Manual • CD ROM (includes complete User’s Manual in PDF format). To see the User’s Manual, Acrobat Reader 4.0 must be installed on your PC.
  • Page 5 Macintosh Figure A.1 Figure A.2 Cable Adapter Figure B.1 (not included) Input1 (D-Sub) Input2 (DVI) Cable cover Figure C.1 Figure C.2 Input1 (D-Sub) Input2 (DVI) Figure C.3 English-4...

  • Page 6: Raise And Lower Monitor Screen

    Vacation Switch Power Button Figure D.1 Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). Figure RL.1 Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1).
  • Page 7 4. Remove the hinge cover (Figure R.1 and Figure R.2). 5. Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.3) the monitor is now ready for mounting in an alternate manner. 6.
  • Page 8 NOTE: This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting. To meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark).

  • Page 9: Osm (On-Screen-Manager) Controls

    Controls OSM (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: To access OSM press any of the control buttons (<, >, -, +, EXIT). To change signal input, press the SELECT button. NOTE: OSM must be closed in order to change signal input. Control Menu EXIT...

  • Page 10: Hot Key

    FINE Improves focus, clarity and image stability by increasing or decreasing this setting. Should the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a fine tuning can be performed using the “Fine” function. It improves focus, clearity and image stability by increasing or decreasing this setting.

  • Page 11: Display Mode

    Information DISPLAY MODE Indicates the current display resolution and frequency setting of the monitor. MONITOR INFO. Indicates the model and serial numbers of your monitor. OSM Warning OSM Warning menus disappear with Exit button. NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear.

  • Page 12: Recommended Use

    NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display-Europe recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

  • Page 13: Specifications

    *2 NEC-Mitsubishi Electronics Display cites recommended resolutions at 75 Hz for optimal display performance. *3 If your display is not showing a picture of the SOG and Composite Sync. Signal, please contact our hotline for further assistance.
  • Page 14 FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size. NaViSet : Is a ground-breaking software family, developed by NEC-Mitsubishi, providing intuitive access to all monitor setting controls and remote diagnosis via the Windows interface, based upon the VESA standard, DDC/CI. Using a standard VGA or...

  • Page 15: Troubleshooting

    NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display-Europe recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Image is unstable, unfocused or swimming is apparent •...
  • Page 16 TCO’99 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.

Table of Contents