NEC MA4000 User Manual page 25

NOTE
NOTE
MA4000 Expense Management Cable Management User Guide - Issue 1
Arranging the Diagram
The default arrangement for the graphic diagram is a straight line from
left to right. You can change it to one of three other arrangements, or
you can manually rearrange the components.
To change the structure of the diagram, choose one of the
following:
Place your mouse over the Arrange link to open a floating menu.
Step 1
Click on one of the structures shown in the menu. The images and
Step 2
connecting lines will change to reflect that structure. 

- OR -
Rearrange the diagram manually using the drag-and-drop function to
Step 3
move the images around on the screen. The connecting lines will
automatically move with the component illustrations. This capability is
often used to arrange the components to replicate their actual physical
layout.
A manual rearrangement of the diagram remains only while you keep the window
open. Once you close that Circuit Trace window, the diagram will resume the default
structure.
Viewing a Component's Detail
From the Circuit Trace window, you can open a pop-up window
displaying the Detail View information for any component shown in this
window.
Viewing a component's Details View information
Click the component's ID link in the box containing its illustration.
Step 1
A pop-up window will appear, displaying the Detail View for that item.
Step 2
Changing the Trace Point
You can change the trace point from within the diagram by choosing
another port or pair/strand for any component. This will change the
information on the table and the diagram.
In any of the illustration boxes, click either the ports or pairs/strands
Step 1
link for that item.
A drop-down menu of all ports and/or pairs/strands connected to that
Step 2
component will be displayed, including which ones are taken and which
are available. Click on the link for the one you want to trace from.
With the new port or pair/strand as the trace point, the table and diagram
Step 3
will change to show all components of that circuit to its endpoints.
You can also open a new trace point table/diagram in a pop-up window to see the
different paths side-by-side. To do so, hold down the Shift key as you click on the
link in Step 2.
Cable Management Tools 2-7