NEC RWC-3217 User Manual page 7

Operating Instructions
Remote Controller
The remote controller transmits signals to the system.
1
Power
2
Swing
Mode
7
Auto
Fan Speed
4
High
_
3
Temp/Time
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
10
8
Timer
9
Power Saver
5
Mid
6
Low
+
6
POWER Buttom
1
The appliance will start when it is
energized or will stop when it is
in operation, if you press this button.
MODE Buttom
2
Used to select the operation mode.
Buttoms
3
Used to set room temperature in COOLING
mode or used to set time in TI MER mode.
4 HIGH Buttom
Used to select the high fan speed
5 MID Buttom
Used to select the Mid
6 LOW Buttom
Used to select the Low
AUTO Buttom
7
Used to select the Auto
TIMER Buttom
8
Used to set or cancel timer operation..
POWER Buttom
9
Used to select the Energy-saving
10 SWING Buttom
Used to select start or stop vertical air vanes swinging.
mode.
fan speed mode.
fan speed mode.
fan speed mode.
mode.