DISASSEMBLY AND REASSEMBLY
3-11) Door Handle Freezer
Part Name
Door Handle
Freezer
3-12) Freezer Light
Part Name
Freezer Light
How To Do
Insert the small flat-head driver to
the hole at the bottom of Cap
Handle and pull the handle
assembly out to the front side with
turning driver to one side.
CAUTION : Turn the handle
assembly though 90
degrees to allow
access to the bottom
fixing position.
- Required Tools
: Flat Head Driver
Ø0.12~0.13"(Ø3.0~3.3mm)
How To Do
1. Remove the light by pulling the
light cover down while pushing
the rear plane of light cover.
Descriptive Picture
Descriptive Picture
26