General - Sony ICF-DVD57TV Service Manual

Location of controls
1
2
3
4
5
6
7
8
9
0
qa
qs
Refer to the pages listed for details.
1 DISPLAY RELEASE
2 Disc Tray
3 TIMER dial and TIMER indicator, PUSH
START/STOP button
To operate the Cooking Timer.
4 Clock Display Window
5 Receptor for the remote control
6 CLOCK button
To set the clock.
7 MODE/SCREEN SIZE button
To set the screen mode, and to set the FM
mode.
8 TV MENU button
To change the screen settings.
9 ENTER button
0 SOUND button
To set the audio emphasis.
qa VOLUME +/– buttons
qs Speakers (left/right)
qd Z OPEN/CLOSE button
qf AUX button
To watch the AUDIO/VIDEO INPUT.
Remote control
1 qf
qg
2
qh
3
qj
4
qk
5
ql
6
w;
7
8 wa
9
ws
0
wd
qa
wf
qs
qd wg
Refer to the pages listed for details.
1 SETUP button
Used to perform menu operations.
2 DISP (Display) button
To display the channel number or the time
information of the disc.
3 AUX button
To watch the AUDIO/VIDEO INPUT.
4 Number buttons
5 REPEAT button
To select the repeat mode (DVD/Video
CD/Audio CD).
6 .(Previous)/>(Next) buttons
7 tSLOW/m(Fast reverse)/TSLOW/M
(Fast forward) buttons
This can also be used in slow playback
mode.
8 TOP MENU button
To display the top menu of a recorded DVD,
or to set the PBC (playback control)
function on or off for the Video CD.
9 O (Return) button
q; v/V/b/B buttons
qa MENU button
To display the recorded DVD menu.
qs VOL (Volume) +/– buttons
qd MUTING button
To attenuate the volume.
SECTION 2

GENERAL

qd
qf
qg
qh
qj
qk
ql
w;
wa
ws
wd
* There is a tactile dot on the VOLUME + and
u buttons.
qg TV button
To turn on the TV.
qh DVD button
To turn on the player.
qj RADIO ON/BAND button
To turn on the radio.
To change the band (FM/AM).
qk OFF button
To turn off the AUX/TV/DVD/Radio
unit.
ql x (Stop) button
w; u (Play/Pause) button
wa TV CH/PRESET –, .(Previous)/
+ ,>(Next) button
To select a TV channel, to tune in a preset
station, to select the item during TV
MENU operation, or to adjust the screen
settings.
ws RADIO TUNE/TIME SET –, m(Fast
reverse)/+, M(Fast forward) button
To tune in a desired radio station or to set
the clock.
This can also be used in slow playback mode.
wd Monitor
The corresponding buttons of the
remote control function the same as
those on the unit.
Instructions in this manual describe how to use
the unit by mainly using the remote control.
* There is a tactile dot on the "5", "u" and
"TUNE/CH+" buttons of the remote control.
qf TV button
To turn on the TV.
qg OFF button
To turn off the AUX/TV/DVD/Radio unit.
qh RADIO/BAND button
To turn on the radio.
qj DVD button
To turn on the unit.
qk TV MENU button
To change the screen settings.
ql u (Play/Pause) button
w; x (Stop) button
wa AUDIO button
To change the audio output/audio language.
ws ANGLE button
To select the multiple angles of view while
playing a DVD.
wd ENTER button
To enter a setting.
wf TUNE/CH +/– buttons
To select the desired TV channel, to tune in
to the desired station, to select the item
during TV MENU operation or to adjust
the screen settings.
wg SOUND button
To set the audio emphasis.
ICF-DVD57TV
This section is extracted from
instruction manual.
Connection
Use this hookup if you subscribe to a CATV
System that does not require a cable box.
Basic Connections
(Connecting CATV or an
Antenna)
Connecting directly to cable or an antenna
Setting the Clock
1
Plug in the unit.
"AM 12:00" will flash in the Clock Display
Window.
2
Press CLOCK for a few seconds.
You will hear a beep and the hour digits
will start to flash in the Clock Display
Window.
3
Press RADIO TUNE/TIME SET –, m(fast
reverse) or +, M(fast forward) until
the correct hour appears in the Clock
Display Window.
4
Press CLOCK (or ENTER) once.
The minute digits will flash.
5
Press RADIO TUNE/TIME SET –, m(fast
reverse) or +, M(fast forward) until
the correct minute appears in the Clock
Display Window.
6
Press CLOCK (or ENTER) once.
You will hear two short beeps and the
seconds start counting from zero.
Tips
• To set the current time rapidly, hold down
RADIO TUNE/TIME SET –, m(fast reverse) or +,
M(fast forward).
• To set the current time exactly to the seconds,
adjust the minute function in step 6 and then
press CLOCK (or ENTER) to synchronize it with a
time signal (such as the telephone time signal).
• In the 12-hour system: "AM 12:00" = midnight.
5