Activating/Deactivating The Handset - Gigaset A49H User Manual

Charge status of the batteries
The charge status is indicated by the top right display icon. After the initial charg-
ing procedure a complete charging to full capacity takes at least 18 hours.
e U
◆
(empty to full)
e
◆
flashes: batteries almost empty
U
◆
flashes: charging
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incom-
ing calls, and so that the alarm can be used.
¢
¢ ¢
MENU Settings
~
¢ ¢
Date:
~
¢
Time:
P #
ing or )
Please note
When entering the time and date, you can move the position of an entry to the
left or right by pressing the control button up or down.
Display in idle state
Once the phone is registered and the time set, the idle
display shows as in this example. If more than one
handset is registered to the base station, the internal
handset number appears in the top left of the display,
e.g. 2.

Activating/deactivating the handset

Press and hold the
the handset.
If you place a deactivated handset in the base station or charging cradle, it will
automatically activate.
Your phone is now ready for use.
If you have any questions about using your phone, please read the tips on trouble-
shooting ("Troubleshooting"
page 16.
¢ ¢
OK Date/Time
(enter the month, day and year in 6-digit format)
¢
(enter hours and minutes in 4-digit format, change am/pm by press-
a
OK (press to return to idle state)
a
key to activate or deactivate
¢
page 12) or contact our Customer Care team
7
¢
OK
¢
OK
U
12/11 11:56am
INT MENU